The Ermak Smart Plasma 30120 is an industrial-grade Fiber Laser Cutting Machines powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Smart Plasma 30120: 3,000 x 12,000 mm cutting area, Hypertherm Maxpro200, 1 to 50 mm, 35 m/min traverse, 15,000 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 15,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Cutting Width | 3,000 mm (118.1 in) |
| Cutting Length | 12,000 mm (472.4 in) |
| Total Width | 4,950 mm (194.9 in) |
| Total Height | 2,280 mm (89.8 in) |
| Torch Distance | 100 mm (3.9 in) |
| Table Height | 750 mm (29.5 in) |
| Max Speed | 35 m/min |
| Machine Axes | X, Y, Z |
| Repeatability | ±0.05 mm (DIN 28206) |
| Torch Height Control | Ermak THC |
| Cutting Capacity | 1 - 50 mm (0.04 - 1.97 in) |
| Power Requirement | 400V, 50Hz, 6 Bar Air |
| Machine Weight | 15,000 kg (33,069 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Smart Plasma 30120 is estimated between $49,500 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
A cutting area of 3,000 mm (118.1 in) by 12,000 mm (472.4 in). That is one full-length wide plate, or two six-metre plates worked as separate zones.
In traverse, yes. This machine is listed at 35 m/min; the EPL 3/5 Axis Plasma 30120 is listed at 20 m/min. Cutting speed itself depends on the plasma unit and the plate.
The oxy-fuel cutting system is an option. Ermak states that advanced ProNest software integration enables a multi-process cutting advantage.
15,000 kg (33,069 lb), with a total width of 4,950 mm (194.9 in) and a total height of 2,280 mm (89.8 in). Supply is 400V, 50Hz and 6 Bar air.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.