The Ermak Power-Bend Falcon 2600-135 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 2600-135: 135 Ton, 2,600 mm bending length, 550 mm daylight, 11 kW motor, 800 mm X travel, 7,673 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 7,673 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 2,600 mm (102.4 in) |
| Bending Power | 135 Ton (149 US tons) |
| Distance Between Columns | 2,200 mm (86.6 in) |
| Y Rapid Speed | 160 mm/s (6.3 in/s) |
| Y Working Speed | 10 mm/s (0.39 in/s) |
| Y Return Speed | 120 mm/s (4.72 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 200 L (52.8 US gal) |
| Motor Power | 11 kW (14.8 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 4,425 mm (174.2 in) |
| Height | 2,800 mm (110.2 in) |
| Width | 2,100 mm (82.7 in) |
| Machine Weight | 7,673 kg (16,916 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 2600-135 is estimated between $51,000 and $89,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $791 / month.
Thicker material on a compact bed. It delivers 135 Ton over 2,600 mm with 550 mm of daylight, driven by an 11 kW motor, and weighs 7,673 kg.
Yes, in approach and return. This machine lists 160 mm/s and 120 mm/s. The Power-Bend Falcon 2600-100 lists 200 mm/s and 155 mm/s, though its working speed is 9.5 mm/s against 10 mm/s here.
The table is 90 mm wide. Dies for thick plate can be wider than that, so check the die holder and clamping with Ermak if large V openings are planned at 135 Ton.
The standard throat depth is 410 mm. Ermak offers special throat depths of 510 mm and above, up to 1,500 mm, as an option for the series.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.