The Ermak Power-Bend Falcon 3100-400 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 3100-400: 400 Ton over 3,100 mm, 510 mm throat, 375 mm stroke, 650 mm daylight, 30 kW, 20,710 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 20,710 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 3,100 mm (122 in) |
| Bending Power | 400 Ton (441 US tons) |
| Distance Between Columns | 2,550 mm (100.4 in) |
| Y Rapid Speed | 110 mm/s (4.33 in/s) |
| Y Working Speed | 8.4 mm/s (0.33 in/s) |
| Y Return Speed | 130 mm/s (5.12 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 400 L (105.7 US gal) |
| Motor Power | 30 kW (40.2 hp) |
| Stroke | 375 mm (14.8 in) |
| Daylight | 650 mm (25.6 in) |
| Throat Depth | 510 mm (20.1 in) |
| Table Height | 1,000 mm (39.4 in) |
| Table Width | 240 mm (9.4 in) |
| Length | 4,550 mm (179.1 in) |
| Height | 3,470 mm (136.6 in) |
| Width | 2,650 mm (104.3 in) |
| Machine Weight | 20,710 kg (45,657 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 3100-400 is estimated between $47,500 and $84,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $736 / month.
A 510 mm throat, a 1,000 mm table height and a weight of 20,710 kg. The Power-Bend Falcon 3100-320 has a 410 mm throat, a 900 mm table height and weighs 16,840 kg. Both use a 30 kW motor.
Ermak's table lists 8.4 mm/s for this size, lower than most Falcons. With an unchanged 30 kW motor, more force means a slower pressing stroke.
Overall height is 3,470 mm, and the machine is 4,550 mm long and 2,650 mm wide. Allow lifting height above that for installation of a 20,710 kg frame.
Ermak offers special throat depths up to 1,500 mm as an option on the series. The standard depth on this model is 510 mm.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.