The Ermak Power-Bend Falcon 4270-400 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 4270-400: 400 Ton over 4,270 mm (14 ft), 510 mm throat, 650 mm daylight, 30 kW motor, 26,631 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 26,631 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 4,270 mm (168.1 in) |
| Bending Power | 400 Ton (441 US tons) |
| Distance Between Columns | 3,780 mm (148.8 in) |
| Y Rapid Speed | 110 mm/s (4.33 in/s) |
| Y Working Speed | 8.4 mm/s (0.33 in/s) |
| Y Return Speed | 130 mm/s (5.12 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 400 L (105.7 US gal) |
| Motor Power | 30 kW (40.2 hp) |
| Stroke | 375 mm (14.8 in) |
| Daylight | 650 mm (25.6 in) |
| Throat Depth | 510 mm (20.1 in) |
| Table Height | 1,000 mm (39.4 in) |
| Table Width | 240 mm (9.4 in) |
| Length | 6,450 mm (253.9 in) |
| Height | 3,500 mm (137.8 in) |
| Width | 2,710 mm (106.7 in) |
| Machine Weight | 26,631 kg (58,710 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 4270-400 is estimated between $53,000 and $92,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $822 / month.
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 4270-400 is estimated between $53,000 and $92,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $822 / month.
375 mm of stroke and 650 mm of daylight. The table below is 240 mm wide and stands 1,000 mm above the floor, higher than on most Falcon sizes.
The Power-Bend Falcon 4270-320 weighs 22,600 kg, has a 410 mm throat and approaches at 140 mm/s. This model weighs 26,631 kg, has a 510 mm throat and approaches at 110 mm/s.
The motor is 30 kW and the oil capacity 400 L. Ermak offers a start-stop function as an option, which stops the main motor when the upper beam has been idle for 2 minutes.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.