The Feeler FDM-5232 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 5200 x 3100 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-5232 mould machining center: 5,200 × 3,100 mm X/Y travel, 5,000 × 2,600 mm table, 23 (26) ton load, 15 m/min X rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,200 mm |
| Y-Axis Travel | 3,100 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 23 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,200 mm (204.7 in) |
| Y Axis Travel | 3,100 (3,700) mm (122.0 (145.7) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 5,000 mm (196.9 in) |
| Table Width | 2,600 mm (102.4 in) |
| Max Table Load | 23 (26) ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-5232 is estimated between $80,500 and $144,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,248 / month.
X travel 5,200 mm (204.7 in), Y travel 3,100 mm (122.0 in), Z travel 800 mm (31.5 in), table 5,000 × 2,600 mm (196.9 × 102.4 in), load 23 ton, spindle 6,000 rpm on a 50 taper, 24 tools. Most rows also carry a bracketed alternative.
All three have 5,200 mm of X travel. The FDM-5228 lists 2,700 (3,300) mm of Y and 18 (23) ton; the FDM-5235 lists 3,400 (4,000) mm of Y, a 3,000 mm wide table and 26 (29) ton. The FDM-5232 sits between them.
X rapid is 15 m/min (591 ipm). The next length, the FDM-6232, is listed at 12 m/min (472 ipm), so this is the longest model of the 32 group at the higher rate.
Feeler describes table guideways in an optimized four-rail symmetrical layout for wide load-bearing surfaces, on a cast iron box-type base with reinforced ribs. The guideway type and size are not stated.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.