The Ermak Power-Bend Falcon 6100-400 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Ermak Power-Bend Falcon 6100-400: 400 Ton, 6,100 mm (20 ft) bending length, 510 mm throat, 650 mm daylight, 30 kW, 36,000 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Ermak (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 0 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 36,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 6,100 mm (240.2 in) |
| Bending Power | 400 Ton (441 US tons) |
| Distance Between Columns | 5,100 mm (200.8 in) |
| Y Rapid Speed | 80 mm/s (3.15 in/s) |
| Y Working Speed | 8.4 mm/s (0.33 in/s) |
| Y Return Speed | 65 mm/s (2.56 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 4 |
| Sheet Supports | 4 |
| Oil Capacity | 400 L (105.7 US gal) |
| Motor Power | 30 kW (40.2 hp) |
| Stroke | 375 mm (14.8 in) |
| Daylight | 650 mm (25.6 in) |
| Throat Depth | 510 mm (20.1 in) |
| Table Height | 1,100 mm (43.3 in) |
| Table Width | 200 mm (7.9 in) |
| Length | 8,150 mm (320.9 in) |
| Height | 3,750 mm (147.6 in) |
| Width | 2,700 mm (106.3 in) |
| Machine Weight | 36,000 kg (79,365 lb) |
According to secondary market equipment benchmarks for November 2026, the Ermak Power-Bend Falcon 6100-400 is estimated between $47,000 and $83,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $729 / month.
It is 8,150 mm long, 2,700 mm wide and 3,750 mm high, and weighs 36,000 kg. Bending length is 6,100 mm, with 5,100 mm between the columns.
Y rapid speed is 80 mm/s, working speed 8.4 mm/s and return speed 65 mm/s. The backgauge is as quick as on small Falcons: 500 mm/s in X and 350 mm/s in R.
A 510 mm throat lets parts longer than the 5,100 mm column spacing sit deeper in the machine. Ermak also offers special throat depths up to 1,500 mm as an option.
Motorized crowning is listed for this size. Ermak additionally offers CNC-controlled hydraulic crowning with multiple hydraulic cylinders acting on a special lower beam, as an option.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.