The Feeler FDM-4228 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 4200 x 2700 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-4228 mould machining center: 4,200 × 2,700 mm X/Y travel, 4,000 × 2,600 mm table, 15 (21) ton load, 6,000 rpm spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,200 mm |
| Y-Axis Travel | 2,700 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 15 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,200 mm (165.4 in) |
| Y Axis Travel | 2,700 (3,300) mm (106.3 (129.9) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 4,000 mm (157.5 in) |
| Table Width | 2,600 mm (102.4 in) |
| Max Table Load | 15 (21) ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-4228 is estimated between $82,000 and $146,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,271 / month.
The row reads 15 (21) ton: 15 ton as listed and 21 ton in brackets. Feeler does not state what the higher figure depends on, so have the rating you need written into the quotation.
The tables are the same size, 4,000 × 2,600 mm. The FDM-4232 has more Y travel, 3,100 (3,700) mm against 2,700 (3,300) mm, and a higher load row of 21 (24) ton.
Feeler states that the FDM Series supports automatic head and tool changing. The magazine row lists 24 tools with a bracketed range of 32-90. The heads themselves are not listed in the series table.
Rapid traverse is 15 m/min (591 ipm) on X and Y and 12 m/min (472 ipm) on Z. From the FDM-6228 upward the X rapid is listed at 12 m/min as well.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.