The Feeler FDM-4232 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 4200 x 3100 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-4232 mould machining center: 4,200 × 3,100 mm X/Y travel, 4,000 × 2,600 mm table, 21 (24) ton load, 6,000 rpm spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,200 mm |
| Y-Axis Travel | 3,100 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 21 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,200 mm (165.4 in) |
| Y Axis Travel | 3,100 (3,700) mm (122.0 (145.7) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 4,000 mm (157.5 in) |
| Table Width | 2,600 mm (102.4 in) |
| Max Table Load | 21 (24) ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-4232 is estimated between $79,500 and $142,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,232 / month.
Y travel and load. The FDM-4232 lists 3,100 (3,700) mm of Y and 21 (24) ton. The FDM-4228 lists 2,700 (3,300) mm and 15 (21) ton. X travel, the 4,000 × 2,600 mm table, Z, spindle, rapids and magazine are the same.
Feeler does not explain it. Table width is 2,600 mm and Y travel 3,100 mm, so the spindle can travel past both table edges. On machines with changeable heads that room is typically used for side machining and for reaching a change station.
Yes. The FDM-4235 has a table 3,000 mm wide with 3,400 (4,000) mm of Y travel and a load row of 24 (27) ton, on the same 4,200 mm of X travel.
6,000 rpm as listed, with 4,000-8,000 rpm in brackets. The taper row reads BT/DIN/CAT 50(#40). Feeler says the enlarged spindle head and slide contact surfaces allow the use of larger diameter tools.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.