The Feeler FDM-5228 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 5200 x 2700 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-5228 mould machining center: 5,200 × 2,700 mm X/Y travel, 5,000 × 2,600 mm table, 18 (23) ton load, 15 m/min X rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,200 mm |
| Y-Axis Travel | 2,700 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 18 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,200 mm (204.7 in) |
| Y Axis Travel | 2,700 (3,300) mm (106.3 (129.9) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 5,000 mm (196.9 in) |
| Table Width | 2,600 mm (102.4 in) |
| Max Table Load | 18 (23) ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-5228 is estimated between $80,500 and $144,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,248 / month.
X 5,200 mm (204.7 in), Y 2,700 mm (106.3 in) or the bracketed 3,300 mm (129.9 in), and Z 800 mm (31.5 in) or the bracketed 1,000-1,400 mm (39.4-55.1 in).
It depends on cutter size. The listed spindle is 6,000 rpm on a 50 taper, and the bracketed range is 4,000-8,000 rpm with #40. Large cutters on big surfaces are well served; small ball-nose tools in fine detail will run below their ideal speed.
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-5228 is estimated between $80,500 and $144,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,248 / month.
The series page does not say for this length. Feeler states only that for X-axis travel over 7200 mm a rack and pinion drive with reduction gearbox is used. At 5,200 mm the FDM-5228 is below that threshold, so ask which drive is fitted.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.