The Feeler FDM-6228 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 6200 x 2700 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-6228 mould machining center: 6,200 × 2,700 mm X/Y travel, 6,000 × 2,600 mm table, 21 (24) ton load, 6,000 rpm 50-taper spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,200 mm |
| Y-Axis Travel | 2,700 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 21 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,200 mm (244.1 in) |
| Y Axis Travel | 2,700 (3,300) mm (106.3 (129.9) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 6,000 mm (236.2 in) |
| Table Width | 2,600 mm (102.4 in) |
| Max Table Load | 21 (24) ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-6228 is estimated between $78,000 and $140,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,209 / month.
6,000 mm (236.2 in), by 2,600 mm (102.4 in) wide. X travel is 6,200 mm (244.1 in), a little more than the table length.
Feeler gives no reason. The table lists 12 m/min (472 ipm) for X from this model upward and 15 m/min for the FDM-5228 and shorter. A longer table carrying 21 ton or more is a larger mass to move.
The 6,000 mm table has the length for it, and the combined weight must stay inside the 21 ton rating, or 24 ton with the bracketed figure. Feeler's page does not describe pendulum operation or a divided work area.
BT/DIN/CAT 50 as listed, with #40 in brackets. Speed is given as 6,000 rpm, with 4,000-8,000 rpm as the bracketed range. The pairing of taper and speed for each option should be confirmed with the maker.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.