The Feeler TC-20α is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 510 x 400 x 300 mm, a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler TC-20α drill-tap center: 510 x 400 mm X/Y travel, 12,000 rpm No.30 spindle, 48 m/min rapids, 14/20 tools, 1.7 second tool change.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 510 mm |
| Y-Axis Travel | 400 mm |
| Z-Axis Travel | 300 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | 7/24 Taper No.30 |
| Table / Platter / Chuck Size | 600 x 400 mm (23.6 x 15.7 in) |
| Max Table Load Capacity | 250 kg |
| Automatic Tool Changer (ATC) | 14 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 510 mm (20.1 in) |
| Y Axis Travel | 400 mm (15.7 in) |
| Z Axis Travel | 300/400 mm (11.8/15.7 in) |
| Table Size | 600 x 400 mm (23.6 x 15.7 in) |
| Max Table Load | 250 kg (551 lb) |
| Max Spindle Speed | 12,000 rpm |
| Spindle Taper | 7/24 Taper No.30 |
| Rapid Traverse X | 48 m/min (1,890 ipm) |
| Rapid Traverse Y | 48 m/min (1,890 ipm) |
| Rapid Traverse Z | 48 m/min (1,890 ipm) |
| Tool Capacity | 14/20 |
According to secondary market equipment benchmarks for November 2026, the Feeler TC-20α is estimated between $49,500 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
The spec column is headed TC-20α Turret/Arm, and the tool row reads 14/20 with Z travel 300/400 mm. Feeler's text describes an arm-type ATC that holds 20 tools. The paired values appear to be turret first and arm second, but the page does not say so outright.
Feeler states a tool-change time of just 1.7 seconds for the arm-type ATC that holds 20 tools, with bidirectional random tool selection. No figure is given for the turret version.
12,000 rpm as standard, with optional 15,000 and 20,000 rpm configurations. Feeler says the spindle reaches 12,000 rpm in just one second and 20,000 rpm in only 1.5 seconds. The taper is 7/24 No.30.
X travel is 510 mm (20.1 in) and Y travel 400 mm (15.7 in), over a 600 x 400 mm (23.6 x 15.7 in) table rated for 250 kg (551 lb). Z travel is listed as 300/400 mm (11.8/15.7 in).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.