The Feeler FDM-6235 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 6200 x 3400 x 800 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FDM-6235 mould machining center: 6,200 × 3,400 mm X/Y travel, 6,000 × 3,000 mm table, 27 (30) ton load, 6,000 rpm spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,200 mm |
| Y-Axis Travel | 3,400 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50(#40) |
| Max Table Load Capacity | 27 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,200 mm (244.1 in) |
| Y Axis Travel | 3,400 (4,000) mm (133.9 (157.5) in) |
| Z Axis Travel | 800 (1,000-1,400) mm (31.5 (39.4-55.1) in) |
| Table Length | 6,000 mm (236.2 in) |
| Table Width | 3,000 mm (118.1 in) |
| Max Table Load | 27 (30) ton |
| Max Spindle Speed | 6,000 (4,000-8,000) rpm |
| Spindle Taper | BT/DIN/CAT 50(#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 12 m/min (472 ipm) |
| Tool Capacity | 24 (32-90) |
According to secondary market equipment benchmarks for November 2026, the Feeler FDM-6235 is estimated between $87,000 and $153,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,349 / month.
Yes. Both columns read 27 (30) ton. The FDM-7235 adds a metre of X travel and table length, 7,200 mm and 7,000 mm against 6,200 mm and 6,000 mm, without a higher load figure.
Feeler publishes no positioning accuracy or repeatability for the FDM series on this page. The maker speaks of long-term high-precision machining and of minimal backlash on the longer rack-driven models. Agree the acceptance values in writing.
X travel 6,200 mm (244.1 in), Y travel 3,400 mm (133.9 in) or the bracketed 4,000 mm, and Z travel 800 mm (31.5 in) or the bracketed 1,000-1,400 mm. The table is 6,000 mm long and 3,000 mm wide.
A 6,000 rpm spindle on BT/DIN/CAT 50 and a 24-tool magazine as listed. The bracketed alternatives are 4,000-8,000 rpm, #40 and 32-90 tools.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.