The Haas Automation TM-1 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas TM-1 toolroom mill: 30 x 16 x 16 in (762 x 406 x 406 mm) travels, 47.8 x 10.5 in table, 4,000 rpm 40-taper spindle, single- or three-phase.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | CT or BT 40 |
| Table / Platter / Chuck Size | 47.8 × 10.5 in (1,213 × 267 mm) |
| Max Table Load Capacity | 350 kg |
| Approx. Machine Weight | 4,440 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 30 in (762 mm) |
| Y-Axis Travel | 16 in (406 mm) |
| Z-Axis Travel | 16 in (406 mm) |
| Spindle Nose To Table Max | 20 in (508 mm) |
| Spindle Nose To Table Min | 4 in (102 mm) |
| Spindle Motor Power | 7.5 hp (5.6 kW) |
| Max Spindle Speed | 4,000 rpm |
| Spindle Torque | 33 ft-lbf @ 1,200 rpm (45 N·m @ 1,200 rpm) |
| Spindle Drive | Direct Speed, Belt Drive |
| Spindle Taper | CT or BT 40 |
| Spindle Bearing Lubrication | Grease Packed |
| Spindle Cooling | Air Cooled |
| Table Size | 47.8 × 10.5 in (1,213 × 267 mm) |
| T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| T Slot Center Distance | 4 in (102 mm) |
| T Slots | 3 |
| Max Table Load | 350 lb (159 kg) |
| Max Cutting Feedrate | 200 ipm (5.1 m/min) |
| Rapid Traverse | 200 ipm (5.1 m/min) |
| Max Thrust X | 2,000 lbf (8,896 N) |
| Max Thrust Y | 2,000 lbf (8,896 N) |
| Max Thrust Z | 2,000 lbf (8,896 N) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Single Phase | 220 VAC 1-phase, 40 A |
| Electrical Low | 220 VAC 3-phase, 25 A |
| Electrical High | 440 VAC 3-phase, 13 A |
| Shipping Domestic Pallet | 112 × 80 × 100 in (284 × 203 × 254 cm) |
| Shipping Export Pallet | 112 × 80 × 100 in (284 × 203 × 254 cm) |
| Machine Weight | 4,440 lb (2,014 kg) |
According to secondary market equipment benchmarks for November 2026, the Haas Automation TM-1 is estimated between $50,000 and $88,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
Haas's specification table for the TM-1 lists no tool changer, tool capacity or tool-change time. The TM-1P is the variant that has one: it carries 10 tools, with the same 30 × 16 × 16 in (762 × 406 × 406 mm) travels and the same 47.8 × 10.5 in (1,213 × 267 mm) table.
The table measures 47.8 in (1,213 mm) and X travel is 30 in (762 mm). The spindle covers the middle of the table only. The remaining length supports long workpieces and gives space to leave a vise, stop or fixture mounted outside the cutting area while another job runs.
According to secondary market equipment benchmarks for November 2026, the Haas Automation TM-1 is estimated between $50,000 and $88,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
X travel and table length. The TM-2 has 40 in (1,016 mm) of X and a 57.8 × 10.5 in (1,467 × 267 mm) table; the TM-1 has 30 in (762 mm) and 47.8 × 10.5 in (1,213 × 267 mm). Y and Z are 16 in (406 mm) on both the TM-1 and the TM-2, the spindle is the same 4,000 rpm unit, and the TM-2 weighs 5,060 lb (2,295 kg) against 4,440 lb (2,014 kg).
One of three: 220 VAC single-phase at 40 A, 220 VAC three-phase at 25 A, or 440 VAC three-phase at 13 A. It also needs compressed air, 4 scfm at 100 psi (113 L/min at 6.9 bar), with supply pressure never below 80 psi (5.5 bar).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.