The Feeler FTC-30 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler FTC-30 CNC lathe: 10 in chuck, φ450 mm turning diameter, 621 mm turning length, φ75 mm bar capacity, 3,500 rpm, A2-8 nose.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 225 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 670 mm |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 10 (12) in (254 (305) mm) |
| Max Turning Diameter | φ450 mm (φ17.7 in) |
| Max Turning Length | 621 mm (24.4 in) |
| Bar Capacity | φ75 mm (φ3.0 in) |
| X Axis Travel | 225+25 mm (8.9+1.0 in) |
| Z Axis Travel | 670 mm (26.4 in) |
| Max Spindle Speed | 3,500 rpm |
| Rapid Traverse Xz | 20/20 m/min (787/787 ipm) |
| Spindle Nose | A2-8 |
| Spindle Bore | φ88 mm (φ3.5 in) |
| Tailstock Taper | MT-4 |
| Turret Stations | 8 |
According to secondary market equipment benchmarks for November 2026, the Feeler FTC-30 is estimated between $44,000 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $682 / month.
Maximum turning diameter φ450 mm (φ17.7 in), maximum turning length 621 mm (24.4 in) and bar capacity φ75 mm (φ3.0 in). The chuck is 10 in, with 12 in in brackets.
An A2-8 nose with a φ88 mm through-spindle hole and a top speed of 3,500 rpm. Feeler's series table lists no motor power, torque or gear range for it.
Linear guide. Feeler heads this range FTC Series CNC Linear Guide Lathes. For box ways the maker's FT series is headed Horizontal Box Way Lathes.
The turret has 8 stations and the tailstock spindle has an MT-4 taper hole. Rapid traverse is 20/20 m/min on X/Z, with 225+25 mm of X travel and 670 mm of Z.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.