The Feeler QMP-30 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 760 x 420 x 510 mm, a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler QMP-30: 30-taper VMC with 760 x 420 x 510 mm travels, 890 x 420 mm table, 12,000 rpm direct drive spindle, 48 m/min rapids.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 760 mm |
| Y-Axis Travel | 420 mm |
| Z-Axis Travel | 510 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | 7/24 Taper No.30 |
| Table / Platter / Chuck Size | 890 x 420 mm (35.0 x 16.5 in) |
| Max Table Load Capacity | 300 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 760 mm (29.9 in) |
| Y Axis Travel | 420 mm (16.5 in) |
| Z Axis Travel | 510 mm (20.1 in) |
| Table Size | 890 x 420 mm (35.0 x 16.5 in) |
| Max Table Load | 300 kg (661 lb) |
| Max Spindle Speed | 12,000 rpm |
| Spindle Taper | 7/24 Taper No.30 |
| Rapid Traverse X | 48 m/min (1,890 ipm) |
| Rapid Traverse Y | 48 m/min (1,890 ipm) |
| Rapid Traverse Z | 48 m/min (1,890 ipm) |
| Tool Capacity | 20 |
According to secondary market equipment benchmarks for November 2026, the Feeler QMP-30 is estimated between $52,000 and $91,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $806 / month.
760 x 420 x 510 mm (29.9 x 16.5 x 20.1 in), with an 890 x 420 mm (35.0 x 16.5 in) table rated for 300 kg (661 lb).
The spindle and the frame. The QMP-32 has a 7/24 Taper No.40 belt type spindle at 10,000 rpm, 820 x 520 mm X and Y travel, an 800 kg table, 24 tools and a Z rapid of 30 m/min. The QMP-30 keeps the No.30 direct drive spindle at 12,000 rpm and 48 m/min on Z.
Feeler says the QMP machines can be equipped with a 20,000 rpm spindle to support small-diameter tools, high-speed cutting and precision machining requirements. The standard figure in the table for the QMP-30 is 12,000 rpm.
20 tools. The table does not give a tool-change time or the maximum tool size and weight, which on a No.30 machine are tighter than on a No.40 machine, so check them against your holders.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.