The Feeler SHM-800L is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 1500 x 1600 x 1200 mm, a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SHM-800L horizontal boring mill: 800 mm table rated 3,000 kg, 1,500 x 1,600 x 1,200 mm travels, 4,000 rpm gear-driven spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,500 mm |
| Y-Axis Travel | 1,600 mm |
| Z-Axis Travel | 1,200 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 800 x 800 mm (31.5 x 31.5 in) |
| Max Table Load Capacity | 3,000 kg |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 800 x 800 mm (31.5 x 31.5 in) |
| Max Table Load | 3,000 kg (6,614 lb) |
| X Axis Travel | 1,500 mm (59.1 in) |
| Y Axis Travel | 1,600 mm (63.0 in) |
| Z Axis Travel | 1,200 mm (47.2 in) |
| Table Indexing | 1°/360 |
| Max Spindle Speed | 4,000 rpm |
| Rapid Traverse Xyz | 24/24/24 m/min (945/945/945 ipm) |
| Tool Capacity | 40 (60) |
According to secondary market equipment benchmarks for November 2026, the Feeler SHM-800L is estimated between $61,500 and $110,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $953 / month.
X is 1,500 mm (59.1 in), Y is 1,600 mm (63.0 in) and Z is 1,200 mm (47.2 in). Rapid traverse is 24/24/24 m/min on the three axes.
According to secondary market equipment benchmarks for November 2026, the Feeler SHM-800L is estimated between $61,500 and $110,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $953 / month.
The SHM-800 has a longer X axis, 2,000 mm, and a shorter Y axis, 1,100 mm, with rapids of 10/10/10 m/min. Table size, load, Z travel, spindle speed and tool capacity are the same as on the SHM-800L.
Feeler says the Y-axis hard ways are coated with Turcite-B wear-resistant material and hand-scraped, and that the dual hard-way span of 570 mm provides support. The guideway type of X and Z is not stated on the page.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.