The AWEA LP-3025 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 3000 x 2500 x 760 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-3025 bridge machining center: 3,000 x 2,500 x 760 mm travels, 3,020 x 2,400 mm table, 12,000 kg load, 6,000 rpm BT50 gear spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,000 mm |
| Y-Axis Travel | 2,500 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 3,020 x 2,400 mm (118.9 x 94.5 in) |
| Max Table Load Capacity | 12,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 36,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 2,500 mm (98.4 in) (3,200 mm Opt.) |
| Z Axis Travel | 760 mm (29.9 in) (1,000 / 1,200 / 1,400 mm Opt.) |
| Table Size | 3,020 x 2,400 mm (118.9 x 94.5 in) |
| Max Table Load | 12,000 kg (26,455 lb) |
| Distance Spindle Nose To Table | 240 ~ 1,000 mm (9.4 ~ 39.4 in) (200 ~ 1,200 mm / 200 ~ 1,400 mm / 200 ~ 1,600 mm Opt.) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm (Std.) Z-axis : 1,000 / 1,200 / 1,400 mm ; Gear 4,000 / 5,000 rpm (Opt.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 20,000 mm/min (787 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.020 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 750 liter (1.5 HP) |
| Machine Weight | 36,000 kg (79,365 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA LP-3025 is estimated between $81,500 and $145,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,263 / month.
Both have 3,000 mm (118.1 in) of X travel and a 20,000 mm/min (787 ipm) X rapid. The LP-3021 has 2,100 mm (82.7 in) of Y, 2,300 mm (90.6 in) between columns and a 3,020 x 2,010 mm (118.9 x 79.1 in) table for 10,000 kg (22,046 lb). The LP-3025 has 2,500 mm (98.4 in) of Y, 2,700 mm (106.3 in) between columns and a 3,020 x 2,400 mm (118.9 x 94.5 in) table for 12,000 kg (26,455 lb).
AWEA lists two standards. Under JIS, positioning accuracy is ± 0.015 mm over full travel and repeatability ± 0.003 mm. Under VDI, positioning accuracy is P ≤ 0.025 mm over full travel and repeatability Ps ≤ 0.020 mm. Spindle thermal compensation, which monitors temperature and compensates automatically, is an option.
The standard 6,000 rpm gear spindle gives 642 N-m at 387 rpm from a 26 kW motor. For heavier roughing the 4,000 rpm gear spindle raises that to 977 N-m at 254 rpm. The built-in motorized spindles, 6,000 or 8,000 rpm, are quoted at a maximum of 600 N-m at 350 rpm. The direct drive spindles, 8,000 or 10,000 rpm, give 165 N-m at 1,500 rpm and are meant for high speed work.
AWEA states that the LP series can be equipped with an automatic head changer and a vertical / horizontal ATC system, which turns the machine into a 5-face machining center. The spec table for the LP-3025 describes the standard vertical-spindle machine, so the head changer has to be specified with the order.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.