The Feeler SVW-2817 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-2817 gantry machining center: 2,800 mm X travel, 2,600 × 1,400 mm table, 9 ton load, 6,000 rpm geared 50-taper spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,800 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 9 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 2,800 mm (110.2 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 2,600 mm (102.4 in) |
| Table Width | 1,400 mm (55.1 in) |
| Max Table Load | 9 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
According to secondary market equipment benchmarks for November 2026, the Feeler SVW-2817 is estimated between $82,000 and $146,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,271 / month.
In the 1,400 mm table width, between the SVW-2217 (2,000 mm table, 8 ton) and the SVW-3217 (3,000 mm table, 10 ton). Its own table is 2,600 mm long and rated for 9 ton.
15 m/min (591 ipm) on X, Y and Z alike. That is the top X rate in this width class: the two longer models, including the SVW-3217, are listed at 12 m/min (472 ipm) on X.
Two things. The table is supported over its full travel, which eliminates overhang, and each table undergoes multi-step precision milling prior to assembly to minimize alignment errors. The table itself is 2,600 × 1,400 mm with a 9 ton rating.
The listed spindle is 6,000 rpm on BT/DIN/CAT 50 with a two-speed geared drive, the one matched to heavy cutting. The bracketed 8,000-15,000 rpm range with #40 suits lighter, faster work. Feeler's table does not give power or torque for either.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.