The Feeler SVW-3223 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-3223 gantry machining center: 3,200 mm X travel, 3,000 × 2,000 mm table, 12 ton load, geared 6,000 rpm spindle, 24-60 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,200 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 12 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 3,000 mm (118.1 in) |
| Table Width | 2,000 mm (78.7 in) |
| Max Table Load | 12 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
According to secondary market equipment benchmarks for November 2026, the Feeler SVW-3223 is estimated between $84,000 and $149,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,302 / month.
In the rows listed on this page, not at all: both show 3,200 mm of X travel, a 3,000 × 2,000 mm table and 12 ton. The difference lies in the Y-axis row of the maker's table, which is not listed here. Ask Feeler for the Y travel of each.
12 ton on the 3,000 × 2,000 mm table. The four-metre SVW-4223 in the same width is rated at 15 ton. Fixture weight counts against the rating.
A fully geared internal transmission with a two-speed gearbox, according to Feeler, for high torque at low speed. The table lists 6,000 rpm on a BT/DIN/CAT 50 taper, with 8,000-15,000 rpm and #40 in brackets.
Feeler says so. The series description calls it a full-travel supported table that eliminates overhang, for long-term stability and vibration absorption during machining. That matters most with a heavy part near the end of the 3,200 mm X stroke.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.