The Feeler SVW-4222 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler SVW-4222 gantry machining center: 4,200 mm X travel, 4,000 × 1,800 mm table, 15 ton load, geared 6,000 rpm 50-taper spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,200 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 800 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Taper Interface | BT/DIN/CAT 50 (#40) |
| Max Table Load Capacity | 15 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,200 mm (165.4 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 4,000 mm (157.5 in) |
| Table Width | 1,800 mm (70.9 in) |
| Max Table Load | 15 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
According to secondary market equipment benchmarks for November 2026, the Feeler SVW-4222 is estimated between $78,000 and $140,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,209 / month.
15 ton. The same figure is listed for the SVW-4223 and SVW-4225, and it is the highest in the series. The table is 4,000 mm long and 1,800 mm wide.
The SVW-4217 has a 1,400 mm wide table rated at 14 ton. The SVW-4222 has an 1,800 mm wide table rated at 15 ton. Both have 4,200 mm of X travel, a 4,000 mm table length and the same rapids.
It depends on part height and on attachment heads. The listed Z travel is 800 mm (31.5 in) and the bracketed alternative 1,000 mm (39.4 in). Daylight under the spindle is not in the series table, so check it with the tallest part and longest tool.
12 m/min (472 ipm) on X and 15 m/min (591 ipm) on Y and Z. Cutting feed rates and axis thrust are not published on the series page.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.