The Feeler VMX-580APC is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 580 x 420 x 510 mm, a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Feeler VMX-580APC: pallet-changer VMC with 580 x 410 mm pallets rated 120 kg, 580 x 420 x 510 mm travels, 12,000 rpm spindle, 20 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Feeler (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 580 mm |
| Y-Axis Travel | 420 mm |
| Z-Axis Travel | 510 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | 7/24 Taper No.40 |
| Table / Platter / Chuck Size | 580 x 410 mm (22.8 x 16.1 in) |
| Max Table Load Capacity | 120 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 580 mm (22.8 in) |
| Y Axis Travel | 420 mm (16.5 in) |
| Z Axis Travel | 510 mm (20.1 in) |
| Table Size | 580 x 410 mm (22.8 x 16.1 in) |
| Max Table Load | 120 kg (265 lb) |
| Max Spindle Speed | 12,000 rpm |
| Spindle Taper | 7/24 Taper No.40 |
| Rapid Traverse X | 48 m/min (1,890 ipm) |
| Rapid Traverse Y | 48 m/min (1,890 ipm) |
| Rapid Traverse Z | 32 m/min (1,260 ipm) |
| Tool Capacity | 20 |
According to secondary market equipment benchmarks for November 2026, the Feeler VMX-580APC is estimated between $50,000 and $88,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
According to secondary market equipment benchmarks for November 2026, the Feeler VMX-580APC is estimated between $50,000 and $88,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
The series description says the VMX-580APC and VMX-820APC have automatic pallet changers with exchange times of 6 and 10 seconds. The sentence covers both machines and the spec table has no pallet-change row, so ask Feeler which figure is this model's.
No. X, Y and Z are 580, 420 and 510 mm, the same as on the VMX-580. Z does not shrink here as it does on the larger APC model: the VMX-820APC lists 505 mm of Z where the VMX-820 lists 560 mm.
A 12,000 rpm spindle with a 7/24 taper No.40, which Feeler describes as a high-speed direct-drive BBT40 spindle, and a 20-tool magazine. Spindle power and torque are not given on the series page.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.