The Haas Automation UMC-1250SS-50 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas UMC-1250SS-50: 50-taper 5-axis mill, 60 hp at up to 12,000 rpm, 140 ft-lbf, 1,200 ipm rapids, 50 x 30 x 28 in travels, 30 in platter.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 60.0 kW |
| Spindle Taper Interface | CT or BT 50 |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 18,820 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 50 in (1,270 mm) |
| Y-Axis Travel | 30 in (762 mm) |
| Z-Axis Travel | 28 in (711 mm) |
| Spindle Nose To Platter Max | 32 in (813 mm) |
| Spindle Nose To Platter Min | 4 in (102 mm) |
| Spindle Motor Power | 60 hp (44.7 kW) |
| Max Spindle Speed | 12,000 rpm |
| Spindle Torque | 140 ft-lbf @ 2,200 rpm (189.8 N·m @ 2,200 rpm) |
| Spindle Drive | Inline Direct-Drive |
| Spindle Taper | CT or BT 50 |
| Spindle Bearing Lubrication | Air / Oil Injection |
| Spindle Cooling | Coolant Jacket |
| B Axis Travel | 120 ° to -35 ° |
| B Axis Max Speed | 170 °/sec |
| B Axis Torque | 2,240 ft-lbf (3,037 N·m) |
| B Axis Brake Torque | 2,000 ft-lbf (2,712 N·m) |
| C Axis Travel | 360 ° |
| C Axis Max Speed | 179 °/sec |
| C Axis Torque | 1,854 ft-lbf (2,514 N·m) |
| C Axis Brake Torque | 900 ft-lbf (1,220 N·m) |
| C Axis Max Part Swing | 39 in (991 mm) |
| Platter Diameter | 30 in (762 mm) |
| Max Platter Load | 1,000 lb (454 kg) |
| Max Platter Load With Pallet Pool | 500 lb (226.8 kg) |
| Platter T Slot Width | 0.626 in to 0.63 in (15.9 mm to 16 mm) |
| Platter T Slots | 7 |
| Max Cutting Feedrate | 833 ipm (21.2 m/min) |
| Rapid Traverse | 1,200 ipm (30.5 m/min) |
| Max Thrust X | 3,300 lbf (14,680 N) |
| Max Thrust Y | 3,300 lbf (14,680 N) |
| Max Thrust Z | 4,050 lbf (18,015 N) |
| Tool Changer Type | SMTC |
| Tool Capacity | 30+1 |
| Max Tool Diameter | 4 in (102 mm) |
| Max Tool Diameter Adjacent Empty | 7 in (178 mm) |
| Max Tool Length | 16 in (406 mm) |
| Max Tool Weight | 30 lb (13.6 kg) |
| Tool To Tool | 4.2 s |
| Chip To Chip | 6.3 s |
| Coolant Capacity | 55 gal (208 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 105 A |
| Electrical High | 440 VAC 3-phase, 53 A |
| Shipping Domestic Pallet | 177 × 110 × 121 in (450 × 279 × 307 cm) |
| Shipping Export Crate | 177 × 112.5 × 125 in (450 × 286 × 318 cm) |
| Machine Weight | 18,820 lb (8,537 kg) |
| Shipping Domestic Pallet With 70 Plus 1 Smtc | 176 × 110 × 134 in (447 × 279 × 340 cm) |
| Shipping Export Crate With 70 Plus 1 Smtc | 176 × 112.5 × 138 in (447 × 286 × 351 cm) |
| Machine Weight With 70 Plus 1 Smtc | 18,880 lb (8,564 kg) |
| Shipping Export Crate For Sheet Metal | 125 × 45 × 47 in (318 × 114 × 119 cm) |
| Machine Weight For Sheet Metal Crate | 1,000 lb (454 kg) |
According to secondary market equipment benchmarks for November 2026, the Haas Automation UMC-1250SS-50 is estimated between $134,500 and $273,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,085 / month.
In the spindle and the tooling it takes. The UMC-1250SS has a 30 hp (22.4 kW) spindle with 90 ft-lbf (122 N·m) at 2,000 rpm in CT40, BT40 or HSK-A63. The UMC-1250SS-50 has 60 hp (44.7 kW) and 140 ft-lbf (189.8 N·m) at 2,200 rpm in CT or BT 50. Both reach 12,000 rpm, rapid at 1,200 ipm (30.5 m/min) and share the travels, the 30 in (762 mm) platter and its 1,000 lb (454 kg) rating.
Because the spindle is built for a wider speed range. The UMC-1250/50 peaks at 170 ft-lbf (230 N·m) at 1,800 rpm and tops out at 7,500 rpm. The UMC-1250SS-50 peaks at 140 ft-lbf (189.8 N·m) at 2,200 rpm and continues to 12,000 rpm. Both are rated 60 hp (44.7 kW). If the work is nearly all heavy roughing, the lower-speed spindle gives more torque; if finishing speed matters, this one does.
The 30+1 side-mount changer takes tools up to 16 in (406 mm) long and 30 lb (13.6 kg). Maximum diameter is 4 in (102 mm) with all pockets occupied and 7 in (178 mm) when the adjacent pockets are empty. A change takes 4.2 s tool-to-tool, 6.3 s chip-to-chip.
According to secondary market equipment benchmarks for November 2026, the Haas Automation UMC-1250SS-50 is estimated between $134,500 and $273,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,085 / month.
Three-phase 220 VAC at 105 A or 440 VAC at 53 A. Compressed air is 4 scfm at 100 psi (113 L/min at 6.9 bar), and pressure must stay above 80 psi (5.5 bar). The coolant tank holds 55 gal (208 L).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.