The Haas Automation UMC-350HD-EDU is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Haas UMC-350HD-EDU 5-axis mill: 15 x 14 x 12 in (381 x 356 x 305 mm) travels, 9.1 in platter, 10,000 rpm 40-taper spindle, 2,400 ipm rapids.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Haas Automation (United States) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | CT or BT 40 |
| Automatic Tool Changer (ATC) | 18 Tool Stations |
| Approx. Machine Weight | 6,420 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 15 in (381 mm) |
| Y-Axis Travel | 14 in (356 mm) |
| Z-Axis Travel | 12 in (305 mm) |
| Spindle Nose To Platter Max | 16 in (406 mm) |
| Spindle Nose To Platter Min | 4 in (102 mm) |
| Trunnion Platter Diameter | 9.1 in (230 mm) |
| Trunnion Max Weight On Platter | 100 lb (45.4 kg) |
| Spindle Motor Power | 15 hp (11.2 kW) |
| Max Spindle Speed | 10,000 rpm |
| Spindle Torque | 46 ft-lbf @ 1,700 rpm (62 N·m @ 1,700 rpm) |
| Spindle Drive | Inline Direct-Drive |
| Spindle Taper | CT or BT 40 |
| Spindle Bearing Lubrication | Air / Oil Injection |
| Spindle Cooling | Air Cooled |
| B Axis Travel | 120 ° to -45 ° |
| B Axis Max Speed | 80 °/sec |
| B Axis Torque | 300 ft-lbf (407 N·m) |
| B Axis Brake Torque | 425 ft-lbf (576 N·m) |
| B Axis Accuracy | ± 25 arc-sec |
| B Axis Repeatability | 10 arc-sec |
| C Axis Travel | 360 ° |
| C Axis Max Speed | 100 °/sec |
| C Axis Torque | 210 ft-lbf (285 N·m) |
| C Axis Brake Torque | 200 ft-lbf (271 N·m) |
| C Axis Max Part Swing | 14.5 in (368 mm) |
| C Axis Accuracy | ± 15 arc-sec |
| C Axis Repeatability | 10 arc-sec |
| Max Cutting Feedrate | 1,200 ipm (30.5 m/min) |
| Rapid Traverse | 2,400 ipm (61 m/min) |
| Max Thrust X | 2,550 lbf (11,343 N) |
| Max Thrust Y | 2,550 lbf (11,343 N) |
| Max Thrust Z | 4,200 lbf (18,683 N) |
| Tool Changer Type | SMTC |
| Tool Capacity | 18+1 |
| Max Tool Diameter | 2.5 in (64 mm) |
| Max Tool Length | 7 in |
| Chip To Chip | 1.6 s |
| Max Tapping Speed | 5,000 rpm |
| Coolant Capacity | 55 gal (208 L) |
| Air Required | 4 scfm @ 100 psi (113 L/min @ 6.9 bar) |
| Inline Air Hose | 3/8 in |
| Air Coupler | 3/8 in |
| Air Pressure Min | 80 psi (5.5 bar) |
| Electrical Low | 220 VAC 3-phase, 40 A |
| Electrical High | 440 VAC 3-phase, 20 A |
| Shipping Domestic Pallet | 102 × 91 × 98.5 in (259 × 231 × 250 cm) |
| Shipping Export Pallet | 102 × 91 × 98.5 in (259 × 231 × 250 cm) |
| Machine Weight | 6,420 lb (2,915 kg) |
According to secondary market equipment benchmarks for November 2026, the Haas Automation UMC-350HD-EDU is estimated between $123,000 and $252,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,907 / month.
The platter is 9.1 in (230 mm) in diameter and carries up to 100 lb (45.4 kg). Maximum part swing on C is 14.5 in (368 mm). Linear travels are 15 in (381 mm) in X, 14 in (356 mm) in Y and 12 in (305 mm) in Z, and the spindle nose sits between 4 in (102 mm) and 16 in (406 mm) from the platter.
The UMC-400 has 17 × 11 × 13 in (432 × 279 × 330 mm) of travel, an 8,100 rpm spindle, 900 ipm (22.9 m/min) rapids and 30+1 tools. The UMC-350HD-EDU has 15 × 14 × 12 in (381 × 356 × 305 mm), 10,000 rpm, 2,400 ipm (61 m/min) rapids and 18+1 tools. Both carry the same 15 hp (11.2 kW), 46 ft-lbf (62 N·m) spindle rating and tilt B from +120° to -45° with 360° on C.
Haas lists B-axis accuracy of ±25 arc-sec and C-axis accuracy of ±15 arc-sec, each with repeatability of 10 arc-sec. B moves at up to 80°/sec with a 425 ft-lbf (576 N·m) brake, and C at up to 100°/sec with a 200 ft-lbf (271 N·m) brake.
The taper is CT or BT 40. The side-mount changer holds 18+1 tools with a 1.6 s chip-to-chip time. Maximum tool diameter is 2.5 in (64 mm) and maximum length is 7 in. The table gives no figure for tool weight or for a larger diameter with empty adjacent pockets, so check those with Haas if you run large cutters.
Electrical supply is 220 VAC three-phase at 40 A or 440 VAC three-phase at 20 A. Air consumption is 4 scfm at 100 psi (113 L/min at 6.9 bar) with at least 80 psi (5.5 bar) at the machine, through a 3/8 in hose and coupler. The coolant tank holds 55 gal (208 L). Shipping weight is 6,420 lb (2,915 kg) on a 102 × 91 × 98.5 in (259 × 231 × 250 cm) pallet.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.