The Hwacheon D2-5AX is an industrial-grade 5-Axis Machining Centers powered by the Fanuc 0i-MF Plus (optional Fanuc 31i-B5 Plus; HARMONY on either). It offers working travels of 650 x 500 x 500 mm, a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon D2-5AX 5-axis machining centre: 650/500/500 mm travels, Ø600 mm table, 12,000-24,000 rpm 37 kW spindles, up to 120 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Fanuc 0i-MF Plus (optional Fanuc 31i-B5 Plus; HARMONY on either) |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 650 mm |
| Y-Axis Travel | 500 mm |
| Z-Axis Travel | 500 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 37.0 kW |
| Spindle Taper Interface | ISO #40, 7/24 taper (BBT-40); options CAT-40, HSK- |
| Table / Platter / Chuck Size | Ø600 mm (23.6 in) (optional Ø400 / Ø500) |
| Max Table Load Capacity | 500 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 11,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 650 mm (25.6 in) |
| Y Axis Travel | 500 mm (19.7 in) |
| Z Axis Travel | 500 mm (19.7 in) |
| B Axis Range | -30 to +110 deg |
| C Axis Range | 360 deg |
| Distance Spindle Nose To Table | 175-675 mm (6.9-26.6 in) |
| Z Guide To Spindle Center | 192 mm (7.6 in) |
| Table Size | Ø600 mm (23.6 in) (optional Ø400 / Ø500) |
| Max Table Load | 500 kgf (1,102 lb) |
| T Slots | 14 x 80 mm x 5 (width x pitch x number) |
| Rotary Table Resolution | 0.0001 deg |
| Max Spindle Speed | 12,000 rpm standard (14,000 / 20,000 / 24,000 rpm optional) |
| Spindle Motor Power | 37 / 18.5 kW (49.6 / 24.8 hp) for 12,000, 20,000 and 24,000 rpm; 37 / 22 kW (49.6 / 29.5 hp) for 14,000 rpm |
| Spindle Torque | 250 Nm (184.4 lb-ft) at 12,000 rpm; 303 Nm (223.5 lb-ft) at 14,000 rpm; 221 Nm (163.0 lb-ft) at 20,000 / 24,000 rpm |
| Spindle Taper | ISO #40, 7/24 taper (BBT-40); options CAT-40, HSK-A63, SK-40; HSK-A63 on 24,000 rpm |
| Spindle Bearing Bore | Ø70 mm (2.8 in) |
| Spindle Cooling | Oil cooler |
| Rapid Traverse Xyz | 36 / 30 / 30 m/min (1,417 / 1,181 / 1,181 ipm) |
| Axis Motors | X / Y / Z / B / C 7 / 4 / 4 / 5.5 / 2.7 kW |
| Tool Capacity | 30 (optional 40, 60, 120) |
| Max Tool Diameter | Ø80 / Ø130 mm (3.1 / 5.1 in) with / without adjacent tools |
| Max Tool Length | 300 mm (11.8 in) |
| Max Tool Weight | 8 kgf (18 lb) |
| Tool Selection | Memory random |
| Pull Stud | MAS P40T-1 (45 deg) |
| Power Requirement | 70 kVA; air 0.5-0.7 MPa |
| Machine Height | 3,610 mm (142.1 in) |
| Floor Space | 3,970 x 3,523 mm (156.3 x 138.7 in) L x W (mesh-drum chip type 4,360 x 3,523 mm; rear discharge 3,450 x 4,370 mm) |
| Machine Weight | 11,500 kgf (25,353 lb) (mesh-drum type 11,800 kgf; rear discharge 11,600 kgf) |
| CNC Control | Fanuc 0i-MF Plus (optional Fanuc 31i-B5 Plus; HARMONY on either) |
| Automation | AWC (20 pallets) or HMP-100 multi-pallet system on the right side; robot loading from front or right |
According to secondary market equipment benchmarks for November 2026, the Hwacheon D2-5AX is estimated between $132,000 and $269,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,046 / month.
X, Y and Z travels are 650, 500 and 500 mm. The B axis tilts from -30 to +110 degrees and the C axis rotates 360 degrees; the distance from spindle nose to table is 175-675 mm.
A 12,000 rpm spindle (37/18.5 kW, 250 Nm) is standard. Options are 14,000 rpm (37/22 kW, 303 Nm), 20,000 rpm and 24,000 rpm (both 37/18.5 kW, 221 Nm). The 24,000 rpm spindle uses HSK-A63; the others take BBT-40, CAT-40, HSK-A63 or SK-40.
30 tools as standard, with 40, 60 and 120 tool magazines available. Maximum tool diameter is 80 mm with adjacent tools (130 mm without), length 300 mm and weight 8 kgf.
Yes. Hwacheon designed it for automation: robots can load from the front or right side, and a 20-pallet AWC or the HMP-100 multi-pallet system can be fitted on the right side.
Fanuc 0i-MF Plus as standard, with Fanuc 31i-B5 Plus as an option. Hwacheon's HARMONY interface is available on both.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.