The AWEA HVM-6025 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 6000 x 3200 x 1000 mm, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA HVM-6025 five-face bridge machining center: 6,000 x 3,200 x 1,000 mm travels, 6,020 x 2,010 mm table rated 17,000 kg, BT 50 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 3,200 mm |
| Z-Axis Travel | 1,000 mm |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT 50 (7 / 24) |
| Table / Platter / Chuck Size | 6,020 x 2,010 mm (237.0" x 79.1") |
| Max Table Load Capacity | 17,000 kg |
| Automatic Tool Changer (ATC) | 60 Tool Stations |
| Approx. Machine Weight | 57,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2") |
| Y Axis Travel | 3,200 mm (126.0") |
| Z Axis Travel | 1,000 mm (39.3") |
| Table Size | 6,020 x 2,010 mm (237.0" x 79.1") |
| Max Table Load | 17,000 kg (37,400 lb) |
| Distance Between Columns | 2,500 mm (98.4") |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 (7 / 24) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9" ~ 47.2") (Standard) 400 ~ 1,400 mm (15.7" ~ 55.1") (Option) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 196.9 IPM) |
| Repeatability Jis B 6338 | ± 0.003 mm (± 0.0001") |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm (± 0.0006") full travel |
| Tool Capacity | 60 tools (90, 120 Option) |
| Max Tool Diameter | 127 / 240 mm (5.0" / 9.4") |
| Max Tool Length | 400 mm (15.7") |
| Max Tool Weight | 25 kg (55 lb) |
| Tool Change Time | 80 sec. |
| Machine Length | 14,875 mm (585") |
| Machine Width | 6,775 mm (267") |
| Machine Height | 5,600 mm (220") |
| Machine Weight | 57,000 kg (125,400 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA HVM-6025 is estimated between $155,500 and $311,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,410 / month.
Both have 6,000 mm (236.2 in) of X travel. The HVM-6025 has a 6,020 x 2,010 mm (237.0 x 79.1 in) table, 2,500 mm (98.4 in) between the columns, 3,200 mm (126.0 in) of Y and a 17,000 kg (37,400 lb) rating. The HVM-6032 has a 6,020 x 2,400 mm (237.0 x 94.5 in) table, 3,200 mm (126.0 in) between the columns, 3,900 mm (153.5 in) of Y and a 20,000 kg (44,000 lb) rating.
Yes. The HVM-6025 is listed at 1 ~ 5,000 mm/min (0.04 ~ 196.9 IPM). The HVM-5025 is listed at 1 ~ 8,000 mm/min (0.04 ~ 315.0 IPM) and the HVM-4025 at 1 ~ 10,000 mm/min (0.04 ~ 393.7 IPM). Check programmed feeds for finishing with large face mills against the lower limit.
17,000 kg (37,400 lb). That figure includes everything on the table: the workpiece, fixtures, parallels and any rotary or angle equipment.
The distance from spindle nose to table is 200 ~ 1,200 mm (7.9 ~ 47.2 in) on the standard machine. A 400 ~ 1,400 mm (15.7 ~ 55.1 in) version is listed as an option. Z travel is 1,000 mm (39.3 in) in both cases, and AWEA notes the distance may vary with other options.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.