The Hwacheon Hi-M G1 Pro is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the FANUC 0i-MF. It offers working travels of 750 x 600 x 350 mm, a top spindle speed of 24,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon Hi-M G1 Pro: 24,000 rpm HSK-E40 VMC with 0.005 mm positioning, C3 ball screws, 0.05 µm scales and HTDC thermal control as standard.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | FANUC 0i-MF |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 750 mm |
| Y-Axis Travel | 600 mm |
| Z-Axis Travel | 350 mm |
| Maximum Spindle Speed | 24,000 RPM |
| Spindle Motor Rating | 9.5 kW |
| Spindle Taper Interface | HSK-E40 |
| Table / Platter / Chuck Size | 750 x 620 mm (29.5 x 24.4 in) |
| Max Table Load Capacity | 400 kg |
| Automatic Tool Changer (ATC) | 16 Tool Stations |
| Approx. Machine Weight | 4,800 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 750 mm (29.5 in) |
| Y Axis Travel | 600 mm (23.6 in) |
| Z Axis Travel | 350 mm (13.8 in) |
| Distance Spindle Nose To Table | 100 ~ 450 mm (3.9 ~ 17.7 in) |
| Table Size | 750 x 620 mm (29.5 x 24.4 in) |
| Max Table Load | 400 kg (882 lb) |
| T Slots | 16 x 125 mm, 5 slots (width x pitch: 0.63 x 4.9 in) |
| Max Spindle Speed | 24,000 rpm |
| Spindle Motor Power | 9.5 kW (12.7 hp) |
| Spindle Taper | HSK-E40 |
| Spindle Drive | Built-in |
| Spindle Lubrication | Grease |
| Spindle Cooling | Jacket cooling (oil cooler) |
| Rapid Traverse Xyz | 25 / 25 / 20 m/min (984 / 984 / 787 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (up to 394 ipm) |
| Positioning Accuracy | within 0.005 mm (0.0002 in) |
| Repeatability | within ±0.003 mm (±0.0001 in) |
| Machining Accuracy | 5 µm (0.0002 in) |
| Ball Screws | C3 grade (standard) |
| Linear Scales | 0.05 µm scale (standard) |
| Thermal Control | HTDC thermal displacement control (standard) |
| Tool Shank | HSK-E40 (BT-30 opt.) |
| Tool Capacity | 16 |
| Max Tool Diameter | Ø63 mm (Ø2.5 in) |
| Max Tool Length | 200 mm (7.9 in) |
| Max Tool Weight | 3 kg (6.6 lb) |
| Tool Selection | Fixed address |
| Power Requirement | 35 kVA |
| Power Supply | 220V, 60Hz |
| Air Supply | 6 ~ 7 kg/cm² |
| Dust Collector Height | 2,710 mm (106.7 in) |
| Machine Height | 2,520 mm (99.2 in) |
| Machine Dimensions | 2,165 x 2,575 mm (85.2 x 101.4 in) (length x width) |
| Machine Weight | 4,800 kg (10,582 lb) |
| CNC Control | FANUC 0i-MF |
According to secondary market equipment benchmarks for November 2026, the Hwacheon Hi-M G1 Pro is estimated between $58,000 and $104,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $899 / month.
Accuracy hardware as standard: C3-grade ball screws, 0.05 µm linear scales and HTDC thermal displacement control, backed by listed figures of 0.005 mm (0.0002 in) positioning, ±0.003 mm (±0.0001 in) repeatability and 5 µm (0.0002 in) machining accuracy. Spindle, table, travels and magazine are the same as on the standard model.
Hwacheon lists positioning accuracy within 0.005 mm (0.0002 in), repeatability within ±0.003 mm (±0.0001 in) and machining accuracy of 5 µm (0.0002 in). Thermal displacement control keeps those figures from drifting as the 24,000 rpm spindle and the axes warm up during a shift.
No. The table lists FANUC 0i-MF only, with a 220V, 60Hz supply. The standard Hwacheon Hi-M G1 is the version offered with either SIEMENS-828D or FANUC 0i-MF, on 380V, 60Hz or 220V, 60Hz respectively.
HSK-E40 shanks, with BT-30 as an option. The magazine holds 16 tools by fixed address, each up to Ø63 mm (Ø2.5 in) in diameter, 200 mm (7.9 in) long and 3 kg (6.6 lb), which suits small end mills and drills run at high speed.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.