The Hwacheon Hi-M1300 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the SIEMENS-828D (FANUC 0i-MF opt.). It offers working travels of 1300 x 800 x 400 mm, a top spindle speed of 24,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon Hi-M1300 VMC: 24,000 or 30,000 rpm BT-30 spindle, 1,300 x 800 x 400 mm travels, 1,300 x 800 mm table, 300 kg load, SIEMENS-828D.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | SIEMENS-828D (FANUC 0i-MF opt.) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,300 mm |
| Y-Axis Travel | 800 mm |
| Z-Axis Travel | 400 mm |
| Maximum Spindle Speed | 24,000 RPM |
| Spindle Motor Rating | 6.0 kW |
| Spindle Taper Interface | BT-30 |
| Table / Platter / Chuck Size | 1,300 x 800 mm (51.2 x 31.5 in) |
| Max Table Load Capacity | 300 kg |
| Automatic Tool Changer (ATC) | 16 Tool Stations |
| Approx. Machine Weight | 5,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 1,300 mm (51.2 in) |
| Y Axis Travel | 800 mm (31.5 in) |
| Z Axis Travel | 400 mm (15.7 in) |
| Distance Spindle Nose To Table | 50 ~ 450 mm (2.0 ~ 17.7 in) |
| Table Size | 1,300 x 800 mm (51.2 x 31.5 in) |
| Max Table Load | 300 kg (661 lb) |
| T Slots | 16 x 125 mm, 5 slots (width x pitch: 0.63 x 4.9 in) |
| Max Spindle Speed | 24,000 rpm / 30,000 rpm (two spindle versions) |
| Spindle Motor Power | 6 kW (8.0 hp) (12.5 kW (16.8 hp) opt.) |
| Spindle Taper | BT-30 |
| Spindle Cooling | Coolant cooling (water chiller) |
| Rapid Traverse Xyz | 25 / 25 / 20 m/min (984 / 984 / 787 ipm) |
| Spindle Drive | Built-in |
| Spindle Lubrication | Grease |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (up to 394 ipm) |
| Tool Capacity | 16 |
| Max Tool Diameter | Ø16 mm (Ø0.6 in) |
| Max Tool Length | 200 mm (7.9 in) |
| Max Tool Weight | 3 kg (6.6 lb) |
| Tool Selection | Fixed Address |
| CNC Control | SIEMENS-828D (FANUC 0i-MF opt.) |
| Power Requirement | 25 kVA |
| Power Supply | 380V, 60Hz (FANUC: 220V, 60Hz) |
| Air Supply | 0.5~0.7MPa x 690Nℓ/min |
| Machine Height | 2,360 ~ 2,760 mm (92.9 ~ 108.7 in) |
| Machine Dimensions | 2,462 x 2,755 mm (96.9 x 108.5 in); full cover 2,690 x 2,670 mm (105.9 x 105.1 in) (length x width) |
| Machine Weight | 5,000 kg (11,023 lb) |
According to secondary market equipment benchmarks for November 2026, the Hwacheon Hi-M1300 is estimated between $68,000 and $124,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,054 / month.
Two: 24,000 rpm and 30,000 rpm, both on a BT-30 taper with a built-in drive, grease lubrication and water-chiller cooling. Power is 6 kW (8.0 hp) as standard, with 12.5 kW (16.8 hp) as an option. Choose the faster spindle when very small end mills decide the cycle time.
Both have a 1,300 x 800 mm (51.2 x 31.5 in) table. The Hwacheon Hi-M G2+ has a 20 kW (26.8 hp) BT 40 spindle at 20,000 rpm, an 800 kg (1,764 lb) table load and weighs 9,500 kg (20,944 lb). The Hi-M1300 runs BT-30 at 24,000 rpm or 30,000 rpm, takes 300 kg (661 lb) and weighs 5,000 kg (11,023 lb).
25 kVA, on 380V, 60Hz with the SIEMENS-828D control or 220V, 60Hz with FANUC 0i-MF. Air supply is 0.5~0.7MPa x 690Nℓ/min. Allow 2,462 x 2,755 mm (96.9 x 108.5 in) of floor, or 2,690 x 2,670 mm (105.9 x 105.1 in) with the full cover.
According to secondary market equipment benchmarks for November 2026, the Hwacheon Hi-M1300 is estimated between $68,000 and $124,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,054 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.