The Hwacheon HiT-400 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the FANUC 0i-MF (12K, 24K) / SIEMENS-828D (15K, 24K). It offers working travels of 520 x 400 x 300 mm, a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon HiT-400: 520 x 400 x 300 mm travels, BBT-30 spindle to 12,000, 15,000 or 24,000 rpm, 60 m/min rapids, 21 tools, 600 x 400 mm table.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | FANUC 0i-MF (12K, 24K) / SIEMENS-828D (15K, 24K) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 520 mm |
| Y-Axis Travel | 400 mm |
| Z-Axis Travel | 300 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | BBT-30 |
| Table / Platter / Chuck Size | 600 x 400 mm (23.6 x 15.7 in) |
| Max Table Load Capacity | 200 kg |
| Automatic Tool Changer (ATC) | 21 Tool Stations |
| Approx. Machine Weight | 2,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 520 mm (20.5 in) |
| Y Axis Travel | 400 mm (15.7 in) |
| Z Axis Travel | 300 mm (11.8 in) |
| Distance Spindle Nose To Table | 150 ~ 450 mm (5.9 ~ 17.7 in) |
| Distance Column To Spindle Center | 454 mm (17.9 in) |
| Table Size | 600 x 400 mm (23.6 x 15.7 in) |
| Max Table Load | 200 kg (441 lb) |
| Max Spindle Speed | 12,000 rpm (12K, FANUC) / 15,000 rpm (15K, SIEMENS) / 24,000 rpm (24K, FANUC or SIEMENS); CTS (opt.) |
| Spindle Motor Power | FANUC versions: 7.5 / 5.5 kW (10.1 / 7.4 hp); SIEMENS versions: 7.2 / 4.8 kW (9.7 / 6.4 hp) |
| Spindle Taper | BBT-30 |
| Spindle Bearing Bore | Ø70 mm (Ø2.8 in) |
| Spindle Drive | Direct-coupled motor |
| Spindle Lubrication | Grease |
| Spindle Cooling | Jacket cooling (fan cooler on 12K / 15K; oil cooler on 24K) |
| Rapid Traverse Xyz | 60 / 60 / 60 m/min (2,362 / 2,362 / 2,362 ipm) |
| Pull Stud | 45° |
| Tool Capacity | 21 |
| Max Tool Diameter | Ø80 mm (Ø3.1 in) |
| Max Tool Weight | 2.5 kg (5.5 lb) |
| Tool Selection | Fixed address |
| Tool Change Time | 1.6 sec (C to C) |
| Power Requirement | 25 kVA |
| Power Supply | FANUC versions: 220V, 60Hz; SIEMENS versions: 380V, 60Hz |
| Air Supply | 5 kg/cm² |
| CNC Control | FANUC 0i-MF (12K, 24K) / SIEMENS-828D (15K, 24K) |
| Max Tool Length | 200 mm (7.9 in) |
| Coolant Tank | 200 L (53 US gal); with CTS 300 L (79 US gal) |
| Machine Height | 2,384 mm (93.9 in); with top cover 2,500 mm (98.4 in); with CTS 2,660 mm (104.7 in) |
| Machine Dimensions | 1,650 x 2,085 mm (65.0 x 82.1 in) (length x width) |
| Machine Weight | 2,500 kg (5,512 lb) |
According to secondary market equipment benchmarks for November 2026, the Hwacheon HiT-400 is estimated between $51,000 and $89,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $791 / month.
Three. The 12K spindle reaches 12,000 rpm with a FANUC 0i-MF. The 15K spindle reaches 15,000 rpm with a SIEMENS-828D. The 24K spindle reaches 24,000 rpm and can have either control. FANUC versions are rated 7.5 / 5.5 kW (10.1 / 7.4 hp), SIEMENS versions 7.2 / 4.8 kW (9.7 / 6.4 hp). Through-spindle coolant is optional on all.
The HiT-400L has a longer 800 x 400 mm (31.5 x 15.7 in) table, the same 200 kg (441 lb) rating and weighs 2,600 kg (5,732 lb). The HiT-360D has two 650 x 400 mm (25.6 x 15.7 in) tables rated 250 kg (551 lb) each. All three use the BBT-30 spindle options and a 21-tool magazine; the HiT-400 has the single 600 x 400 mm (23.6 x 15.7 in) table.
Up to Ø80 mm (Ø3.1 in) in diameter, 200 mm (7.9 in) in length and 2.5 kg (5.5 lb) in weight, in a BBT-30 taper with a 45° pull stud. The magazine holds 21 tools on fixed addresses and changes in 1.6 sec chip to chip.
The electrical demand is 25 kVA. FANUC versions run on 220V, 60Hz and SIEMENS versions on 380V, 60Hz. Air supply is listed at 5 kg/cm². Check which control you are ordering before planning the electrical installation.
According to secondary market equipment benchmarks for November 2026, the Hwacheon HiT-400 is estimated between $51,000 and $89,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $791 / month.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.