The Hwacheon MEGAIII-260 is an industrial-grade CNC Lathes & Turning Centers powered by the SIEMENS 828D. a top spindle speed of 1 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon MEGAIII-260 heavy lathe: Ø2,600 mm turning over the bed, 1,100 mm X travel, up to 17,000 mm between centres, 124,672 Nm torque.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | SIEMENS 828D |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,100 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 6,300 mm |
| Maximum Spindle Speed | 1 RPM |
| Spindle Motor Rating | 136.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 81 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Swing Over Bed | Ø2,650 mm (Ø104.33 in) |
| Swing Over Cross Slide | Ø480 ~ Ø2,200 mm (Ø18.90 ~ Ø86.61 in) |
| Max Turning Diameter | Ø2,600 mm (Ø102.36 in) over bed |
| Distance Between Centers | 6,000 / 8,000 / 10,000 / 12,000 / 17,000 mm (236.22 / 314.96 / 393.7 / 472.44 / 669.29 in) |
| Max Workpiece Weight | 25 t (55,115 lb) (Opt. 40 t) |
| X Axis Travel | 1,100 mm (43.31 in) |
| Z Axis Travel | 6,300 / 8,300 / 10,300 / 12,300 / 17,300 mm (248.03 / 326.77 / 405.51 / 484.25 / 681.1 in) |
| Chuck Size | 63 in |
| Spindle Nose | Special (Ø300 x 280) |
| Spindle Torque | 12,713 kgf·m (124,672 Nm) |
| Spindle Speed Ranges | Auto 3-steps |
| Max Spindle Speed | 1 ~ 130 rpm |
| Spindle Motor Power | 136 / 92 kW (182.38 / 123.37 hp) |
| Rapid Traverse X | 4 m/min (157.48 ipm) |
| Rapid Traverse Z | 6 m/min (236.22 ipm) |
| Tool Post | Electric 4-way (square) tool post, □440 mm |
| Turret Stations | 4 tools |
| Tool Shank Size | □40 mm (Opt. □50 mm), Dia.60 mm |
| Tailstock | Built-in type |
| Tailstock Quill Diameter | Ø450 mm (Ø17.72 in) [Opt. Ø600 mm (Ø23.62 in)] |
| Tailstock Center | Ø160 x 75° fixed centre |
| Tailstock Quill Travel | 300 mm (11.81 in) |
| Bed Width | 2,000 mm (78.74 in) |
| Bed Length | 10,100 / 12,100 / 14,100 / 16,100 / 21,110 mm (397.64 / 476.38 / 555.12 / 633.86 / 831.1 in) |
| Bed Type | 3-Way (1-Bed) |
| Cross Slide | Short Carriage / Square |
| Coolant Tank | 700 L (185 gal) |
| Power Requirement | 200 kVA; 380 V, 60 Hz |
| Machine Dimensions | 13,500 / 15,500 / 17,500 / 19,500 / 24,500 x 4,200 x 3,725 mm (531.5 / 610.24 / 688.98 / 767.72 / 964.57 x 165.35 x 146.65 in) L x W x H |
| Machine Weight | 81 / 86 / 91 / 96 / 110 t (178,573 / 189,596 / 200,619 / 211,642 / 242,506 lb) for the 6000 / 8000 / 10000 / 12000 / 17000 beds |
| CNC Control | SIEMENS 828D |
According to secondary market equipment benchmarks for November 2026, the Hwacheon MEGAIII-260 is estimated between $65,500 and $126,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,015 / month.
The MEGAIII-260 turns up to Ø2,600 mm (Ø102.36 in) over the bed against Ø2,000 mm (Ø78.74 in) on the MEGAIII-200, and it is heavier, 81 t (178,573 lb) against 77 t (169,754 lb) with the 6000 bed. Chuck, spindle nose, speed range, torque and drive power are the same on both.
X travel is 1,100 mm (43.31 in). Swing over the bed is Ø2,650 mm (Ø104.33 in), and swing over the cross slide is listed as Ø480 ~ Ø2,200 mm (Ø18.90 ~ Ø86.61 in). Check the cross-slide figure against the largest diameter that has to pass the carriage, not only against the turning diameter.
Five distances between centres: 6,000 / 8,000 / 10,000 / 12,000 / 17,000 mm. The beds are 10,100 / 12,100 / 14,100 / 16,100 / 21,110 mm long, Z travel is 6,300 / 8,300 / 10,300 / 12,300 / 17,300 mm, and overall machine length runs from 13,500 mm (531.5 in) to 24,500 mm (964.57 in).
When the part is short and wide. The VT-2000 turns up to Ø2,500 mm (Ø98.4 in) on a Ø2,000 mm (Ø78.7 in) table and carries 15,000 kgf (33,069 lb). The MEGAIII-260 holds the part between centres, so it suits long shafts and rolls up to 17,000 mm (669.29 in) and 25 t (55,115 lb).
1 ~ 130 rpm over three automatic steps, with a 136 / 92 kW (182.38 / 123.37 hp) drive and 12,713 kgf·m (124,672 Nm) of torque. The spindle nose is a special Ø300 x 280 type carrying a 63 in chuck, and the control is a SIEMENS 828D.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.