The Hwacheon SIMPLEX-2 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the CS CAM 800S. It offers working travels of 700 x 320 x 390 mm, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon SIMPLEX-2: 700 x 320 x 390 mm travels, 1,100 x 280 mm table, N.T. 40 spindle to 3,600 rpm in 16 steps, head swivel ±45°, manual quill.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | CS CAM 800S |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 700 mm |
| Y-Axis Travel | 320 mm |
| Z-Axis Travel | 390 mm |
| Spindle Motor Rating | 2.0 kW |
| Spindle Taper Interface | N.T. 40 |
| Table / Platter / Chuck Size | 1,100 x 280 mm (43.3 x 11.0 in) |
| Max Table Load Capacity | 300 kg |
| Approx. Machine Weight | 2,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 700 mm (27.6 in) |
| Y Axis Travel | 320 mm (12.6 in) |
| Z Axis Travel | 390 mm (15.4 in) |
| Distance Spindle Nose To Table | 100 ~ 490 mm (3.9 ~ 19.3 in) |
| Table Size | 1,100 x 280 mm (43.3 x 11.0 in) |
| Max Table Load | 300 kg (661 lb) |
| T Slots | 16 x 60 mm, 3 slots (width x pitch: 0.63 x 2.4 in) |
| Spindle Speed Range | 75 ~ 3,600 rpm, 16 steps (50 Hz: 60 ~ 3,000 rpm, 16 steps) |
| Spindle Motor Power | 2 / 1 kW (2.7 / 1.3 hp) (2p / 4p) |
| Spindle Taper | N.T. 40 |
| Quill Travel | 140 mm (5.5 in) (manual) |
| Head Swivel | ±45° (left / right) |
| Overarm Travel | 450 mm (17.7 in) |
| Rapid Traverse Xyz | 5,000 / 5,000 / 2,000 mm/min (197 / 197 / 79 ipm) |
| Cutting Feed Rate Xyz | 2,000 / 2,000 / 2,000 mm/min (79 / 79 / 79 ipm) |
| Axis Motors Xyz | 1.8 / 1.8 / 2.9 kW (2.4 / 2.4 / 3.9 hp) |
| Power Requirement | 13 kVA |
| Power Supply | 220V, 60Hz |
| Machine Height | 2,265 mm (89.2 in) |
| Machine Dimensions | 2,500 x 2,200 mm (98.4 x 86.6 in) (length x width) |
| Machine Weight | 2,500 kg (5,512 lb) |
| CNC Control | CS CAM 800S |
According to secondary market equipment benchmarks for November 2026, the Hwacheon SIMPLEX-2 is estimated between $50,500 and $89,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $783 / month.
Sixteen steps from 75 to 3,600 rpm on a 60 Hz supply, and sixteen steps from 60 to 3,000 rpm on 50 Hz. The motor is listed at 2 / 1 kW (2.7 / 1.3 hp) for its 2p / 4p windings and the spindle takes N.T. 40 tooling.
Its spec table lists no tool magazine, tool capacity or tool change time, and it does list a manual quill with 140 mm (5.5 in) of travel. Confirm with Hwacheon how tools are changed before planning jobs that need many tools in one cycle.
The head swivels ±45° to the left or right, so holes and faces at an angle can be machined without tilting the part. The overarm travels 450 mm (17.7 in), moving the spindle over the table, and the quill gives 140 mm (5.5 in) of manual feed.
The VESTA-850B is a machining center with a 1,050 x 600 mm (41.3 x 23.6 in) table rated 800 kg (1,764 lb), an 8,000 rpm BT-40 spindle at 18.5 / 11 kW (24.8 / 14.8 hp) and 24 tools. The SIMPLEX-2 is a far smaller machine: 300 kg (661 lb) on a 1,100 x 280 mm (43.3 x 11.0 in) table and a 2 / 1 kW (2.7 / 1.3 hp) spindle.
Floor space of 2,500 x 2,200 mm (98.4 x 86.6 in), 2,265 mm (89.2 in) of height and a floor for 2,500 kg (5,512 lb). It takes 13 kVA at 220V, 60Hz. The table lists no compressed-air requirement.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.