The Hwacheon VESTA-650T is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Fanuc 0i-MF Plus. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon VESTA-650T twin-spindle VMC: 650 x 650 mm X/Y, 700 mm Z and W, 12,000 or 15,000 rpm BBT-40 spindles, two 30-tool magazines.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Fanuc 0i-MF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 650 mm |
| Y-Axis Travel | 650 mm |
| Z-Axis Travel | 0 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 18.5 kW |
| Spindle Taper Interface | ISO#40, 7/24 Taper BBT-40 |
| Table / Platter / Chuck Size | 1,400 x 600 mm (55.1 x 23.6 in) |
| Max Table Load Capacity | 800 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 10,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 650 mm (25.6 in) |
| Y Axis Travel | 650 mm (25.6 in) |
| Z W Axis Travel | 700 mm (27.6 in) |
| Spindle Center Distance | 525 mm (20.7 in) (opt.: 575 / 625 mm (22.6 / 24.6 in)) |
| Distance Spindle Nose To Table | 150 ~ 850 mm (5.9 ~ 33.5 in) |
| Distance Column To Spindle Center | 745 mm (29.3 in) |
| Table Size | 1,400 x 600 mm (55.1 x 23.6 in) |
| Max Table Load | 800 kg (1,764 lb) |
| T Slots | 18 x 125 mm (0.71 x 4.92 in), 5 slots (width x pitch, count) |
| Max Spindle Speed | 12,000 / 15,000 rpm |
| Spindle Motor Power | 18.5 / 11 kW (24.8 / 14.8 hp) |
| Spindle Taper | ISO#40, 7/24 Taper BBT-40 |
| Spindle Bearing Bore | Ø70 mm (Ø2.8 in) |
| Spindle Drive | Direct drive |
| Spindle Bearing Lubrication | 12K: Grease; 15K: Air-oil |
| Spindle Cooling | Jacket cooling (oil cooler) |
| Rapid Traverse Xyzw | 48 / 48 / 40 / 40 m/min (1,890 / 1,890 / 1,575 / 1,575 ipm) |
| Tool Shank | BBT-40 |
| Pull Stud | MAS P40T-1 (45˚) |
| Tool Capacity | Left: 30 / Right: 30 |
| Max Tool Diameter | Ø78 / Ø100 mm (Ø3.1 / Ø3.9 in) (with / without adjacent tools) |
| Max Tool Length | 300 mm (11.8 in) |
| Max Tool Weight | 8 kg (18 lb) |
| Tool Selection | Memory Random |
| Power Requirement | 63 kVA |
| Air Supply | 0.5 ~ 0.7 MPa x 690 NL/min |
| Coolant Tank Capacity | 420 L (111 US gal) |
| Machine Height | 3,485 mm (137.2 in) |
| Floor Space | 2,734 x 3,920 mm (107.6 x 154.3 in) |
| Machine Weight | 10,000 kg (22,046 lb) |
| CNC Control | Fanuc 0i-MF Plus |
According to secondary market equipment benchmarks for November 2026, the Hwacheon VESTA-650T is estimated between $53,000 and $92,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $822 / month.
Two spindles, each on its own vertical axis (Z and W, both 700 mm (27.6 in)), and two magazines of 30 tools each, listed as Left: 30 / Right: 30. Both use memory random tool selection and BBT-40 shanks with a MAS P40T-1 (45˚) pull stud.
The spindle centers are 525 mm (20.7 in) apart as standard, with 575 mm (22.6 in) and 625 mm (24.6 in) as options. Since both spindles share one X and Y motion, the spacing is also the distance between matching points on the two fixtures, so choose it from the widest part you plan to run.
The VESTA-1100 is a single-spindle machine with a 1,300 x 600 mm (51.2 x 23.6 in) table, one 30-tool magazine and a weight of 5,900 kg (13,007 lb). The VESTA-650T has two spindles and two 30-tool magazines on a 1,400 x 600 mm (55.1 x 23.6 in) table, weighs 10,000 kg (22,046 lb) and carries 800 kg (1,764 lb) on the table.
A 63 kVA supply, air at 0.5 ~ 0.7 MPa x 690 NL/min, a floor space of 2,734 x 3,920 mm (107.6 x 154.3 in) and 3,485 mm (137.2 in) of height. The machine weighs 10,000 kg (22,046 lb) and the coolant tank holds 420 L (111 US gal).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.