The Hwacheon VT-4500 is an industrial-grade CNC Lathes & Turning Centers powered by the SIEMENS 840D sl. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hwacheon VT-4500 vertical lathe: Ø4,500 mm table, Ø5,000 mm turning, 40,000 kgf load, 162,268 Nm table torque, BT-50 milling spindle standard.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hwacheon (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | SIEMENS 840D sl |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | -250 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 1,500 mm |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | Ø4,500 mm (Ø177.2 in) |
| Max Table Load Capacity | 40,000 kg |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Approx. Machine Weight | 140,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Variants | VT-4500 (Milling) |
| Swing Over Bed | Ø5,000 mm (Ø196.9 in) |
| Max Turning Diameter | Ø5,000 mm (Ø196.9 in) |
| Max Turning Height | 2,500 mm (98.4 in) |
| Table Size | Ø4,500 mm (Ø177.2 in) |
| Table Speed Max | 1 ~ 50 rpm, 2 steps |
| Table Motor | 129 / 105 kW (173.0 / 140.8 hp) |
| Max Table Torque | 162,268 Nm (119,689 lb-ft) |
| Max Table Load | 40,000 kgf (88,184 lb) |
| C Axis Drive | Double pinion |
| C Axis | 0.001° indexing, 0.5 rpm max, 0 ~ 180 deg/min cutting feed |
| X Axis Travel | -250 ~ 4,100 mm (-9.8 ~ 161.4 in) (ram) |
| Z Axis Travel | 1,500 mm (59.1 in) (ram) |
| W Axis Travel | 2,000 mm (78.7 in) (cross rail) |
| Rapid Traverse | 6 / 6 / 0.5 m/min (236 / 236 / 20 ipm) (X / Z / W) |
| Ram Size | □350 mm (□13.8 in) |
| Milling Spindle Taper | BT-50 |
| Milling Spindle Motor | 38 / 30 kW (51.0 / 40.2 hp) |
| Milling Spindle Speed Max | 1,500 rpm |
| Tool Capacity | 12 |
| Turning Tool Size | □50 mm (mm type) |
| Max Tool Diameter | Ø180 / Ø350 mm (Ø7.1 / Ø13.8 in) (adjacent pockets full / empty) |
| Max Tool Length | 415 mm (16.3 in) |
| Max Tool Weight | 100 kgf (220 lb) |
| Power Requirement | 200 kVA, 380 V, 60 Hz |
| Air Supply | 5 ~ 7 bar |
| Machine Height | 9,800 mm (385.8 in) |
| Machine Dimensions | 11,500 x 7,500 mm (452.8 x 295.3 in) (L x W) |
| Machine Weight | 140,000 kg (308,644 lb) |
| CNC Control | SIEMENS 840D sl |
According to secondary market equipment benchmarks for November 2026, the Hwacheon VT-4500 is estimated between $42,000 and $83,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $651 / month.
The VT-4500 has a Ø4,500 mm (Ø177.2 in) table and turns Ø5,000 mm (Ø196.9 in), against Ø3,000 mm (Ø118.1 in) and Ø4,000 mm (Ø157.5 in) on the VT-3000. Against the VT-3000 it carries 40,000 kgf instead of 30,000 kgf, gives 162,268 Nm of torque instead of 100,299 Nm, and tops out at 50 rpm instead of 100 rpm.
1 ~ 50 rpm in 2 steps, from a 129 / 105 kW (173.0 / 140.8 hp) motor through a double-pinion drive, with 162,268 Nm (119,689 lb-ft) of torque. On the largest diameters even 50 rpm gives a high surface speed, so torque rather than speed sets the limit.
A 38 / 30 kW (51.0 / 40.2 hp) milling spindle with a BT-50 taper, running to 1,500 rpm. The C axis indexes in 0.001° steps, turns at up to 0.5 rpm and feeds at 0 ~ 180 deg/min. Milling tools can weigh up to 100 kgf (220 lb).
A foundation for 140,000 kg (308,644 lb), 9,800 mm (385.8 in) of height and 11,500 x 7,500 mm (452.8 x 295.3 in) of floor. Power is 200 kVA at 380 V, 60 Hz, and the air supply 5 ~ 7 bar.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.