The Hyundai-WIA E160 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA E160 CNC lathe in two versions: E160A with 6 in chuck and 12 tools, E160C with 8 in chuck and 126 Nm. 280 mm machining diameter.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 160 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | E160A: 6 in; E160C: 8 in |
| Spindle Motor Power | 11 / 7.5 kW |
| Max Machining Diameter | 280 mm |
| Max Machining Length | E160A: 300 mm; E160C: 280 mm |
| Rapid Traverse Xz | 30 / 30 m/min |
| Spindle Drive Type | Belt |
| Spindle Torque | E160A: 35.8 / 70 Nm; E160C: 64.4 / 126 Nm |
| Tool Capacity | E160A: 12; E160C: 10 |
| Travel Xz | 165 / 330 mm |
| Catalogue Models | E160A, E160C |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA E160 is estimated between $38,500 and $78,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $597 / month.
Chuck, torque, tool count and length. The E160A has a 6 in chuck, 35.8 / 70 Nm, 12 tools and a 300 mm maximum machining length. The E160C has an 8 in chuck, 64.4 / 126 Nm, 10 tools and 280 mm. Both have the 11 / 7.5 kW motor, 165 / 330 mm of X / Z travel and 30 / 30 m/min rapids.
The maximum machining diameter is 280 mm on both versions. Maximum machining length is 300 mm on the E160A and 280 mm on the E160C. Travels are 165 mm in X and 330 mm in Z. The chuck, 6 in or 8 in, sets what can actually be gripped, so match the version to the largest diameter you need to hold.
Both versions have an 11 / 7.5 kW belt-driven spindle. Torque is where they part: 35.8 / 70 Nm on the E160A and 64.4 / 126 Nm on the E160C. Hyundai WIA prints each as a pair of ratings without labelling them in the headline table, so ask which is the continuous figure if the job involves long roughing passes.
The E160A. Small diameters need high rpm to reach a useful cutting speed, and the E160A runs to 6,000 rpm where the E160C stops at 4,000 rpm. The E160A also has 12 tools against 10. Its lower torque, 35.8 / 70 Nm, is rarely the limit on small aluminium work.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.