The Hyundai-WIA KH63G is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Fanuc 31i-B. a top spindle speed of 8,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA KH63G horizontal machining center: 630 x 630 mm pallet, 50-size taper, 60 tools, 16 sec pallet change. Older model with conflicting rows.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Fanuc 31i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 8,000 RPM |
| Spindle Motor Rating | 37.0 kW |
| Spindle Taper Interface | CAT 50 / BT 50 |
| Automatic Tool Changer (ATC) | 60 Tool Stations |
| Approx. Machine Weight | 31,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Pallet Size | 630 x 630 mm (24.8 x 24.8 in) |
| X-Axis Travel | 900 mm (35.4 in) |
| Y-Axis Travel | 900 mm (35.4 in) |
| Z-Axis Travel | 900 mm (35.4 in) |
| Max Spindle Speed | 8,000 RPM |
| Spindle Taper | CAT 50 / BT 50 |
| Spindle Motor Power | 37/26 kW (50/35 hp) |
| Tool Capacity | 60 tools (expandable to 120) |
| Chip To Chip | 16 sec |
| Pallet Change Time | 16 sec |
| Rapid Traverse | 40/40/40 m/min (1,575 ipm) |
| B Axis Indexing | 0.001° increment (1° full index) |
| Max Workpiece Weight | 800 kg (1,764 lb) |
| Machine Weight | 31000 |
| CNC Control | Fanuc 31i-B |
| Pallet W | 24.8" |
| Pallet L | 24.8" |
| Cnc Control | CNC (Fanuc 18IMB) |
| X | 37.4" |
| Y | 32.5" |
| Z | 29.9" |
| Atc | 60 |
| Rpm | 4,500 RPM |
| Taper | NT #50 |
| Power | 29.5 hp |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA KH63G is estimated between $109,000 and $219,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,690 / month.
It is not in Hyundai WIA's current lineup, so treat it as an older model. The listed figures come from a third-party listing, not the manufacturer, and several of them contradict each other. A seller's documentation and the machine's own plates are the better source for a specific KH63G.
The table has two answers. One set of rows lists 900 mm (35.4 in) on each of X, Y and Z. A second set lists 37.4 in on X, 32.5 in on Y and 29.9 in on Z. Both sets agree on the 630 x 630 mm (24.8 x 24.8 in) pallet, so measure the travels before quoting a part that is close to either limit.
Unclear from the listing. It shows 8,000 RPM with 37/26 kW (50/35 hp) and, separately, 4,500 RPM with 29.5 hp. The taper is a 50 size in every row: CAT 50 / BT 50 in one, NT #50 in another. Confirm the spindle from its nameplate.
60 tools, which both tool rows agree on, with the magazine listed as expandable to 120. Chip-to-chip time is given as 16 sec. No maximum tool diameter, length or weight is listed.
Mainly in pallet size. The KH63G has a 630 x 630 mm (24.8 x 24.8 in) pallet and the KH500 a 500 x 500 mm (19.7 x 19.7 in) pallet. The KH500 is listed with 50 m/min (1,969 ipm) rapids against 40/40/40 m/min (1,575 ipm) here. Both carry listed figures that need confirming.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.