The Hyundai-WIA L2600SY Series is an industrial-grade Multi-Tasking & Mill-Turn Machines powered by the Standard CNC. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L2600SY Series: 10 in chuck turning center with Y axis, 420 mm turning diameter, 760 mm length, 4,000 rpm, 22 / 15 kW, live tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | Multi-Tasking & Mill-Turn Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 420 mm (16.5 in) |
| Max Spindle Speed | 4,000 rpm |
| Spindle Motor Power | 22 / 15 kW (29.5 / 20.1 hp) |
| X-Axis Travel | 265 mm (10.4 in) |
| Y-Axis Travel | 120 mm (4.7 in) |
| Z-Axis Travel | 830 mm (32.7 in) |
| Travel Zb | 830 mm (32.7 in) |
| Rapid Traverse | X/Y/Z: 30 / 10 / 30 / 30 m/min (1,181 / 394 / 1,181 / 1,181 ipm) |
| Turret Stations | 12 |
| Live Tool Speed | 5,000 rpm |
| Chuck Size | 10 in (254 mm) |
| Max Turning Length | 760 mm (29.9 in) |
| Travel Axes | X/Y/Z: 265 / 120 / 830 / 830 mm (10.4 / 4.7 / 32.7 / 32.7 in) |
| Spindle Torque | 599 / 409 N·m (441.8 / 301.7 ft-lbf) |
| Spindle Drive | Built in |
| Tool Capacity | 12 tools |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L2600SY Series is estimated between $49,500 and $87,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $767 / month.
The spindle and chuck. The L2600SY Series has a 10 in (254 mm) chuck, 4,000 rpm, 22 / 15 kW (29.5 / 20.1 hp) and 599 / 409 N·m (441.8 / 301.7 ft-lbf). The L3000SY Series has a 12 in (305 mm) chuck, 3,000 rpm, 37 / 25 kW (49.6 / 33.5 hp) and 1,262 / 1,003 N·m (930.9 / 739.8 ft-lbf). Travels, turning length, turret and live tool speed are listed the same for both.
Up to 420 mm (16.5 in) in diameter and 760 mm (29.9 in) in length, held in a 10 in (254 mm) chuck. X travel is 265 mm (10.4 in) and Z travel is 830 mm (32.7 in). The table gives no bar capacity, so bar work needs that figure from WIA.
Yes. Y travel is 120 mm (4.7 in) and the live tools run at up to 5,000 rpm on a 12-station turret. Y rapid is 10 m/min (394 ipm). The table does not give live tool power or torque, which decide how heavy a milling cut the turret can take.
The table lists it as a fourth travel of 830 mm (32.7 in), the same length as Z, with a rapid rate of 30 m/min (1,181 ipm). It gives no chuck size, speed or power for what that axis carries. Ask WIA what is mounted on it, and for its ratings, if the job needs back-end machining.
4,000 rpm maximum, from a built-in motor listed at 22 / 15 kW (29.5 / 20.1 hp) and 599 / 409 N·m (441.8 / 301.7 ft-lbf). That sits between the 5,000 rpm of the L2000SY Series and the 3,000 rpm of the L3000SY Series.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.