The Hyundai-WIA L300MC is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L300MC: 12 in chuck turning center, 500 mm diameter, 600 mm length, 3,000 rpm belt-driven spindle, 22 / 18.5 kW, 4,000 rpm live tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 12 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 12 in (305 mm) |
| Max Turning Diameter | 500 mm (19.7 in) |
| Max Turning Length | 600 mm (23.6 in) |
| Max Spindle Speed | 3,000 rpm |
| Spindle Motor Power | 22 / 18.5 kW (29.5 / 24.8 hp) |
| Turret Stations | 12 |
| X-Axis Travel | 355 mm (14 in) |
| Z-Axis Travel | 750 mm (29.5 in) |
| Rapid Traverse | X/Z: 20 / 24 m/min (787 / 945 ipm) |
| Spindle Torque | 787.3 / 465 N·m (580.7 / 343 ft-lbf) |
| Spindle Drive | Belt |
| Tool Capacity | 12 tools |
| Live Tool Speed | 4,000 rpm |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L300MC is estimated between $37,000 and $75,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $574 / month.
A 12 in (305 mm) chuck, a maximum turning diameter of 500 mm (19.7 in) and a maximum turning length of 600 mm (23.6 in). X travel is 355 mm (14 in) and Z travel is 750 mm (29.5 in).
The L300MC has the larger chuck, 12 in (305 mm) against 10 in (254 mm) on the L300A, plus live tools at 4,000 rpm and 355 mm (14 in) of X travel. The L300A turns longer, 720 mm (28.3 in) against 600 mm (23.6 in), spins faster at 3,600 rpm against 3,000 rpm, and has a gear-driven spindle listed at 739 / 622 N·m (545.1 / 458.8 ft-lbf).
WIA lists a belt-driven spindle with a 3,000 rpm maximum, 22 / 18.5 kW (29.5 / 24.8 hp) of power and 787.3 / 465 N·m (580.7 / 343 ft-lbf) of torque. The pairs are not labelled in the table, so confirm which figure is the continuous rating.
Yes, within limits. The table lists live tools at 4,000 rpm on the 12-station turret. It lists X and Z travel only, with no Y travel, so expect centreline drilling, cross holes and slots rather than off-centre milling.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.