The Hyundai-WIA L400MA is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 0i-TF Plus. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA L400MA: slant-bed box-way lathe, 12 in chuck, 460 mm turning diameter, 102 mm spindle bore, 30/22 kW spindle, optional ±52.5 mm Y axis.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 0i-TF Plus |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 10,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 12" |
| Swing Over Bed | 30.709" |
| Max Turning Diameter | 460 mm (18.1 in) |
| Max Turning Length | 1,500 mm (59.1 in) |
| Max Spindle Speed | 3,500 RPM |
| Spindle Motor Power | 30/22 kW (10 min/continuous) (40/30 hp) |
| Spindle Bore | 102 mm (4.0 in) |
| Turret Stations | 12 |
| Rapid Traverse Z | 18 m/min |
| Rapid Traverse X | 14 m/min |
| CNC Control | Fanuc 0i-TF Plus |
| Guideway Type | Box ways (slant bed 45°) |
| Y Axis Option | ±52.5 mm (optional) |
| Machine Weight | Approx. 10,500 kg (23,148 lb) |
| Bar Capacity | 3.5433" |
| Max Rpm | 3,000 RPM |
| Power | 40.2 hp |
| Machining Length | 46.457" |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L400MA is estimated between $46,000 and $92,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $713 / month.
The listed spindle bore is 102 mm (4.0 in) and the listed bar capacity is 3.5433 in, behind a 12 in chuck. Maximum turning diameter is 460 mm (18.1 in) and swing over the bed is 30.709 in.
Only as an option. The listed table shows 2 axes as the base configuration and a Y axis of ±52.5 mm marked optional, so a particular machine may have been built without it. Check the axis on the machine and on its build sheet.
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA L400MA is estimated between $46,000 and $92,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $713 / month.
The listed guideway type is box ways on a 45° slant bed, and the machine weighs approx. 10,500 kg (23,148 lb). Rapid traverse is 18 m/min on Z and 14 m/min on X, which is slower than linear-guide machines but typical of a bed built for heavy cutting.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.