The Hyundai-WIA LM2200TTSYY/TTSYYC is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Hyundai WIA LM2200TTSYY/TTSYYC: twin-turret lathes with Y1 and Y2 axes, 8 in or 10 in main chuck, 2 x 12 stations and 18.5 / 15 kW spindle power.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Hyundai-WIA (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 18.5 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 2 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Main Chuck Size | 8" TTSYY / 10" TTSYYC |
| Sub Spindle Chuck | 8" (both variants) |
| Spindle Motor Power | 18.5 / 15 kW |
| Spindle Drive | Belt |
| Upper Turret | 12 stations with Y1-axis |
| Lower Turret | 12 stations with Y2-axis |
| Total Tool Stations | 2 x 12 (24 total) |
| Travel X1 | 165 mm (6.5 in) |
| Travel Y1 | 100 mm (3.9 in) |
| Travel Z1 | 700 mm (27.6 in) |
| Travel X2 | 165 mm (6.5 in) |
| Travel Y2 | 100 mm (3.9 in) |
| Travel Z2 | 700 mm (27.6 in) |
| Rapid Traverse | 20/10/36/20/10/36/36 m/min X1/Y1/Z1/X2/Y2/Z2/ZB |
| Chuck Size | LM2200TTSYY: 8 in; LM2200TTSYYC: 10 in |
| Max Machining Diameter | 230 mm |
| Rapid Traverse X1 Z1 Y X2 Z2 A | LM2200TTSYY: 20 / 36 / 10 / 26 / 36 / 10 m/min; LM2200TTSYYC: 20 / 36 / 10 / 20 / 36 / 10 m/min |
| Rotary Tool Speed Max | 5,000 min-1 |
| Spindle Drive Type | Belt |
| Tool Capacity | 2 x 12 |
| Tool Size | 20 / 32 mm |
| Travel X1 Z1 Y X2 Z2 A | 165 / 700 / 100 / 165 / 700 / 100 mm |
| Catalogue Models | LM2200TTSYY, LM2200TTSYYC |
According to secondary market equipment benchmarks for November 2026, the Hyundai-WIA LM2200TTSYY/TTSYYC is estimated between $36,500 and $75,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $566 / month.
The main chuck. The LM2200TTSYY has an 8 in main chuck and the LM2200TTSYYC a 10 in one, and both have an 8 in sub-spindle chuck. Travels, the 2 x 12 turret arrangement, the 18.5 / 15 kW spindle power and the 230 mm maximum machining diameter are listed the same for both.
Yes. The upper turret is listed as 12 stations with a Y1 axis and the lower turret as 12 stations with a Y2 axis. Each Y axis travels 100 mm (3.9 in) and rapids at 10 m/min, and rotary tools run to 5,000 min-1.
X1 and X2 travel 165 mm (6.5 in), Y1 and Y2 travel 100 mm (3.9 in), and Z1 and Z2 travel 700 mm (27.6 in). The upper and lower axis sets are the same size, so a tool reaches equally far from either turret.
Spindle power is listed at 18.5 / 15 kW with a belt drive. The table does not give spindle speed or torque for either model. For comparison, the LM1800TTSY is listed at 22 / 11 kW (29.5 / 14.8 hp), 5,000 rpm and 358 / 118 N·m (264.1 / 87 ft-lbf).
2 x 12: twelve stations on the upper turret and twelve on the lower, for 24 stations in total. The tool size row reads 20 / 32 mm. The LM2500TTSY II is the listed alternative with more stations, at 2×24 (BMT65) tools.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.