The Victor Taichung Vturn-A260/75 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Victor Taichung Vturn-A260/75: 10 in chuck turning center, 3,500 rpm, Ø75 mm bar, 8 in sub-spindle at 5,000 rpm, Y-axis configurations.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Victor Taichung (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 6,700 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Standard Turning Diameter | Ø358 mm (Ø14.09 in) |
| Max Turning Diameter | SM: Ø480 mm (Ø18.89 in); CM, SCM, YCM, YSCM: Ø420 mm (Ø16.53 in) |
| Max Turning Length | SM, YCM, YSCM: 950 mm (37.40 in); CM, SCM: 910 mm (35.82 in) |
| Swing Over Carriage | SM: Ø620 mm (Ø24.4 in); CM, SCM, YCM, YSCM: Ø770 mm (Ø30.31 in) |
| Max Spindle Speed | 3,500 rpm |
| Spindle Nose | A2-8 (10") |
| Bar Capacity | Ø75 mm (Ø2.95 in) |
| Sub Spindle Speed | SM, SCM, YSCM: 5,000 rpm (CM, YCM: not listed) |
| Sub Spindle Nose | SM, SCM, YSCM: A2-6 (8") (CM, YCM: not listed) |
| Sub Spindle Bar Capacity | SM, SCM, YSCM: Ø52 mm (Ø2.04 in) (CM, YCM: not listed) |
| Turret Tools | 12 |
| Tool Shank Size | SM: □20 mm; CM, SCM, YCM, YSCM: □25 mm |
| Tailstock Quill Taper | CM, YCM: M.T. #5 (SM, SCM, YSCM: not listed) |
| Machine Weight | SM, SCM: 6,700 kg (14,770.95 lb); CM: 6,500 kg (14,330.02 lb); YCM: 7,300 kg (16,093.72 lb); YSCM: 7,500 kg (16,534.64 lb) |
According to secondary market equipment benchmarks for November 2026, the Victor Taichung Vturn-A260/75 is estimated between $39,500 and $79,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $612 / month.
5,000 rpm, an A2-6 nose with an 8 in chuck and Ø52 mm (Ø2.04 in) bar capacity, listed for the SM, SCM and YSCM configurations. The CM and YCM have an M.T. #5 tailstock quill and no sub-spindle figures.
Victor Taichung captions the Vturn-A260 YSCM as Y-axis plus sub-spindle plus C-axis with a BMT turret. In the table it is the heaviest configuration at 7,500 kg (16,534.64 lb), with 950 mm (37.40 in) of turning length.
Ø480 mm (Ø18.89 in) in the SM column and Ø420 mm (Ø16.53 in) in the CM, SCM, YCM and YSCM columns. The standard turning diameter is Ø358 mm (Ø14.09 in) throughout.
The Vturn-A260/75 has an A2-8 main spindle at 3,500 rpm with Ø75 mm (Ø2.95 in) bar capacity. The Vturn-A200/60 has an A2-6 spindle at 4,200 rpm with Ø52 mm (Ø2.04 in). Its sub-spindle passes Ø52 mm (Ø2.04 in), against Ø30 mm (Ø1.18 in) on the Vturn-A200/60.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.