The Makino EDAC1 is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino EDAC1 precision sinker EDM: 220 x 180 x 220 mm travels, ±1 micron positioning, 5 micron inside corners, 30 amp generator, 50 kg parts.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 350 x 250 mm (13.8 in x 9.8 in) |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 350 x 250 mm (13.8 in x 9.8 in) |
| X-Axis Travel | 220 mm (8.66 in) |
| Y-Axis Travel | 180 mm (7.08 in) |
| Z-Axis Travel | 220 mm (8.66 in) |
| Max Workpiece Weight | 50 kgs (110 lb) |
| Work Tank Size | 450 x 350 x 200 mm (17.7 in x 13.77 in x 7.87 in) |
| Max Electrode Weight | 5 kgs (11 lb) |
| Max Machining Current | 30 amp |
According to secondary market equipment benchmarks for November 2026, the Makino EDAC1 is estimated between $43,000 and $89,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $667 / month.
Makino states that the mechanical alignment of each axis is 2 microns (0.00008") or smaller over the full stroke, and that the machine can produce positional tolerances of ±1 micron (0.00004"). The optional Mi C-axis indexes with ±2 arc seconds of positioning accuracy.
Makino quotes surface finishes down to 1.3 µin Ra (0.25 µm Rz), and a smallest inside corner radius of 5 microns. The generator's peak machining current is 30 amp, so the machine is built for fine finishing rather than heavy roughing.
The table is 350 x 250 mm (13.8 in x 9.8 in) and the work tank 450 x 350 x 200 mm (17.7 in x 13.77 in x 7.87 in). Travels are 220 mm (8.66 in) in X, 180 mm (7.08 in) in Y and 220 mm (8.66 in) in Z. Workpieces can weigh up to 50 kgs (110 lb), electrodes up to 5 kgs (11 lb).
Both have a 350 x 250 mm (13.8 in x 9.8 in) table, 220 mm (8.7 in) of X and 180 mm (7.1 in) of Y. The EDFH-1 has 300 mm (11.8 in) of Z against 220 mm (8.66 in) on the EDAC1. The EDAC1 is the model Makino positions for small electronics and micromachining accuracy.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.