The Makino MAG A4 is an industrial-grade 5-Axis Machining Centers powered by the Makino Professional 6 (Pro 6). a top spindle speed of 33,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino MAG A4, a possible older 5-axis model: listed travels about 4,000 x 2,500 x 1,000 mm, 33,000 RPM HSK-A63 spindle, 120 tools. Unverified.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Makino Professional 6 (Pro 6) |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 33,000 RPM |
| Spindle Motor Rating | 80.0 kW |
| Spindle Taper Interface | HSK-A63 |
| Automatic Tool Changer (ATC) | 120 Tool Stations |
| Rapid Traverse Rate | 60 m/min (2,362 ipm) |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | ~4,000 mm (157.5 in) |
| Y-Axis Travel | ~2,500 mm (98.4 in) |
| Z-Axis Travel | ~1,000 mm (39.4 in) |
| A Axis Range | +30° to -120° (150° total, direct drive) |
| C Axis Range | 360° (continuous, direct drive) |
| Max Spindle Speed | 33,000 RPM |
| Spindle Taper | HSK-A63 |
| Spindle Motor Power | ~80 kW (107 hp) |
| Tool Capacity | 120 tools standard |
| Table Configuration | Fixed table, moving gantry column |
| Rapid Traverse Xy | 60 m/min (2,362 ipm) |
| Rapid Traverse Z | 50 m/min (1,969 ipm) |
| Chip Evacuation | Through-table chip conveyor system |
| CNC Control | Makino Professional 6 (Pro 6) |
According to secondary market equipment benchmarks for November 2026, the Makino MAG A4 is estimated between $141,000 and $287,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,186 / month.
It is not in Makino's current lineup and may be an older model. The figures on this page are the listed ones and have not been verified against a Makino specification, so confirm the machine's travels, spindle and control from its own documentation.
About 4,000 mm (157.5 in) in X, 2,500 mm (98.4 in) in Y and 1,000 mm (39.4 in) in Z. The table marks all three as approximate.
A 33,000 RPM spindle with an HSK-A63 taper and about 80 kW (107 hp). The magazine is listed at 120 tools standard.
The current MAG4 has 4,000 mm (157.5 in) of X, 2,200 mm (86.6 in) of Y and 800 mm (31.5 in) of Z on a 3,500 x 2,000 mm (137.8 in x 78.7 in) pallet, with a 33,000 rpm - 130 KW spindle and 120 (180) tools. The listed MAG A4 figures show similar X with more Y and Z, but on a fixed table and without verification.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.