The Makino MCD2016-5XA is an industrial-grade 5-Axis Machining Centers powered by the Makino Professional 6 (Pro 6). a top spindle speed of 40,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino MCD2016-5XA, possibly an older model: listed 200 x 150 x 150 mm travels and 40,000 RPM HSK-E32, but its inch rows describe another machine.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Makino Professional 6 (Pro 6) |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 40,000 RPM |
| Spindle Motor Rating | 3.7 kW |
| Spindle Taper Interface | HSK-E32 |
| Table / Platter / Chuck Size | 200 x 150 mm (7.9 x 5.9 in) |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 4,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 200 mm (7.9 in) |
| Y-Axis Travel | 150 mm (5.9 in) |
| Z-Axis Travel | 150 mm (5.9 in) |
| A Axis Range | +90° to -90° (180° total) |
| C Axis Range | 360° (continuous) |
| Max Spindle Speed | 40,000 RPM |
| Spindle Taper | HSK-E32 |
| Spindle Motor Power | 3.7 kW (5.0 hp) |
| Tool Capacity | 30, (60,99,120) |
| Table Size | 200 x 150 mm (7.9 x 5.9 in) |
| Table Load Capacity | 50 kg (110 lb) |
| Positioning Accuracy | 0.5 µm |
| Repeatability | 0.2 µm |
| Rapid Traverse Xyz | 20 m/min (787 ipm) |
| Machine Weight | ~4,500 kg (9,921 lb) |
| CNC Control | Makino Professional 6 (Pro 6) |
| Pallet | 39.4" |
| A Axis | 115° (-100°to +15°) |
| B Axis | 360° |
| C Axis | None |
| Spindle Rpm | 6,000 rpm |
| Rapid Traverse | 630 in/min |
| Cutting Feedrate | 630 in/min |
| Maximum Workpiece | Ø78.7" x 60" R |
| Maximum Payload | 5,060 lbs. |
| Maximum Tool Diameter | 11.81" |
According to secondary market equipment benchmarks for November 2026, the Makino MCD2016-5XA is estimated between $129,000 and $266,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,000 / month.
Not as listed. The model is not in Makino's current lineup, the table is unverified, and its metric and inch rows disagree: 200 mm (7.9 in) of X and a 50 kg (110 lb) table against a 39.4" pallet and a 5,060 lbs. payload. Confirm the machine from its plate and documents.
The listed table gives two versions. One is an A axis of +90° to -90° (180° total) with a 360° (continuous) C axis. The other is an A axis of 115° (-100°to +15°), a 360° B axis and no C axis. Only the machine itself can settle which is right.
The N2-5XA is a current, verified Makino model with 300 mm (11.8 in) of X and Y, 230 mm (9.1 in) of Z, a 200 mm ø pallet, a 20,000 rpm HSK-A40 spindle and 36 tools. The MCD2016-5XA metric rows show smaller travels and a faster 40,000 RPM spindle, but they are unverified.
The listed weight is about 4,500 kg (9,921 lb). Like the rest of the table this is unverified, so get a confirmed figure before planning rigging and the foundation.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.