The Makino U1310 is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino U1310 wire EDM: 1,310 x 1,010 mm X and Y, 520 mm Z (620 mm optional), 6,000 kg workpiece capacity and ±3 µm positioning accuracy.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | Opposed L-Shape (1720 x 1475mm) (Opposed L-Shape (67.7 in x 58.1 in)) |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | Opposed L-Shape (1720 x 1475mm) (Opposed L-Shape (67.7 in x 58.1 in)) |
| X-Axis Travel | 1,310 mm (51.57 in) |
| Y-Axis Travel | 1,010 mm (39.76 in) |
| Z-Axis Travel | 520 mm (optional 620 mm) (20.47 in (optional 24.41 in)) |
| U Axis Travel | ±101 mm (±3.98 in) |
| V Axis Travel | ±101 mm (±3.98 in) |
| Max Workpiece Size | 6,000 kg (13,228 lb.) |
| Wire Diameter | 0.200, 0.250, 0.300mm Ø (0.008 in, 0.010 in, 0.012 in Ø ) |
According to secondary market equipment benchmarks for November 2026, the Makino U1310 is estimated between $47,500 and $96,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $736 / month.
Makino states positioning accuracy of ±3 µm (±0.0001 in) over the full stroke. On a machine with 1,310 mm (51.57 in) of X, that figure tells you whether features at opposite ends of a large plate will line up, so ask how it is measured and whether it is checked at installation.
The spec table lists 6,000 kg (13,228 lb.) under maximum workpiece. It gives no maximum workpiece dimensions, so check a large plate against the Opposed L-Shape table of 1720 x 1475mm (67.7 in x 58.1 in) and against the tank before quoting the job.
520 mm (20.47 in) as standard, with 620 mm (24.41 in) available as an option. U and V travel is ±101 mm (±3.98 in), which sets how much taper can be cut on a part that uses the full height of the stroke.
The U86 lists 800 x 600 mm (31.5 x 23.6 in) of X and Y on a 1220 x 910 mm (48 in x 35.8 in) table. The U1310 extends that to 1,310 x 1,010 mm (51.57 x 39.76 in) on an Opposed L-Shape table. Both take 0.200 to 0.300 mm wire and have ±101 mm (±3.98 in) of U and V.
The programmable 3-sided drop tank lowers below the work table height, leaving the table open for crane loading and unloading of heavy parts and making automation simpler to integrate. The dielectric reservoir is built into the base casting, which Makino says improves thermal stability and reduces the machine footprint.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.