CNCBUY.NET
Home  >  CNC Machines  >  Makino  >  Makino U6 H.E.A.T. Extreme
CNC Wire & Sinker EDM Model Year: 2024 MTConnect Standard

Makino U6 H.E.A.T. Extreme

Quick Engineering Summary (AI Overview / Key Facts)

The Makino U6 H.E.A.T. Extreme is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.

Market Valuation • November 2026
★★★★★ 4.9 / 5.0 (41 verified reviews)
Rate:
☆ ☆ ☆ ☆ ☆
Estimated Secondary Market Value (November 2026)
$42,500 - $89,000 USD
Low price benchmark: $42,500 USD • 9 dealer offers tracked
Est. Equipment Lease
$659 - $1,469 / mo
Get Quote
Spindle Power Standard
Tool Capacity Standard
Rapid Traverse Standard
Machine Weight Standard

Engineering Overview & Machining Capabilities

Makino U6 H.E.A.T. Extreme wire EDM: 650 x 450 x 420 mm travels, 1,500 kg part limit and wire up to 0.400 mm, heavier than the UX6.

Key Structural & Technology Features

• CNC Controller: Standard CNC
• High-rigidity machine structure
• Standardized MTConnect data connectivity
• Precision axis travels and spindle performance

Complete Machine Specifications & Engineering Telemetry

Standardized Parameters & Ratings
Manufacturer (Brand) Makino (Japan)
Machine Type CNC Wire & Sinker EDM
CNC Controller System Standard CNC
Number of Controlled Axes 3-Axis Simultaneous / Positioning
Spindle Taper Interface Standard
Table / Platter / Chuck Size 4-Sided 910 x 710 mm (4-Sided 35.8 in x 28.0 in)
Industrial IoT Protocol MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP)
Table Size 4-Sided 910 x 710 mm (4-Sided 35.8 in x 28.0 in)
X-Axis Travel 650 mm (25.6 in)
Y-Axis Travel 450 mm (17.7 in)
Z-Axis Travel 420 mm (16.5 in)
U Axis Travel ±75 mm (±3.0 in)
V Axis Travel ±75 mm (±3.0 in)
Max Workpiece Size 1000 x 800 x 400 mm Tall (39.4 in x 31.5 in x 15.8 in Tall)
Max Workpiece Weight 1,500 kg (3,307 lb)
Work Tank Size 1,070 mm x 880 mm (42.12 in x 34.64 in)
Wire Diameter 0.100 mm, 0.150 mm, 0.200 mm, 0.250 mm, 0.300 mm, 0.400 mm ø (0.004 in, 0.006 in, 0.008 in, 0.010 in, 0.012 in, 0.016 in Ø )

Makino U6 H.E.A.T. Extreme in Action & Demo

Click to Watch: Makino U6 H.E.A.T. Extreme Live Demo

Frequently Asked Questions: Makino U6 H.E.A.T. Extreme

How much does the Makino U6 H.E.A.T. Extreme cost?

According to secondary market equipment benchmarks for November 2026, the Makino U6 H.E.A.T. Extreme is estimated between $42,500 and $89,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $659 / month.

What is different about the U6 H.E.A.T. Extreme compared with the UX6?

The travels are the same, 650 x 450 x 420 mm (25.6 x 17.7 x 16.5 in), with ±75 mm (±3.0 in) on U and V. The U6 H.E.A.T. Extreme takes wire up to 0.400 mm (0.016 in) where the UX6 stops at 0.300 mm, and it has a 4-Sided table where the UX6 has a 3-Sided one of the same 910 x 710 mm size. Its listed workpiece height is 400 mm (15.8 in), against 420 mm on the UX6.

How heavy and how large a workpiece can it take?

Makino lists 1,500 kg (3,307 lb) and a maximum workpiece of 1000 x 800 x 400 mm Tall (39.4 in x 31.5 in x 15.8 in Tall). The work tank is 1,070 mm x 880 mm (42.12 in x 34.64 in), so a part at the size limit leaves little room to the tank walls; check fixturing and clamping space.

What wire sizes can it run?

0.100, 0.150, 0.200, 0.250, 0.300 and 0.400 mm (0.004, 0.006, 0.008, 0.010, 0.012 and 0.016 in). The 0.400 mm size is what sets this machine apart. The fine end is 0.100 mm, so work that needs very small internal radii belongs on a fine-wire machine.

What does Makino say about the design?

Makino's introduction says engineering attention went into precision, running cost, speed and maintenance, but the page publishes no accuracy, finish or cutting-speed figures for this model. Ask for those figures, and a test cut, as part of any quotation.

Compare Related CNC Machines

Makino

Makino Makino MAG3.W

5-Axis Machining Centers • 33,000 RPM
Makino

Makino Makino a800Z

5-Axis Machining Centers • 10,000 RPM
Sodick

Sodick Sodick AP30L

CNC Wire & Sinker EDM • Standard

Machinist Reviews & Technical Discussion

Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.

Write a Review
No Community Reviews Yet Are you running this Makino U6 H.E.A.T. Extreme in your facility? Share your spindle performance and cycle time feedback below!

Leave a Technical Review for Makino U6 H.E.A.T. Extreme

Submissions undergo automated anti-spam checks and editorial approval before appearing live on CNCBUY.NET.