The Makino UX3i is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino UX3i wire EDM: 370 x 270 x 220 mm travels, 600 kg part limit, ±0.1 °C chiller, flatter worktable and jet-less wire threading.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 3-Sided 630 x 460 mm (3-Sided 24.8 in x 18.11 in) |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 3-Sided 630 x 460 mm (3-Sided 24.8 in x 18.11 in) |
| X-Axis Travel | 370mm (14.6 in) |
| Y-Axis Travel | 270mm (10.6 in) |
| Z-Axis Travel | 220mm (8.7 in) |
| U Axis Travel | ±50 mm (±1.96 in) |
| V Axis Travel | ±50 mm (±2.0 in) |
| Max Workpiece Size | 770 x 590 x 220 mm Tall (30.3 in x 23.2 in x 8.7 in Tall) |
| Max Workpiece Weight | 600 kg (1,323 lb) |
| Work Tank Size | 790 mm x 611 mm (31.10 in x 24.05 in) |
| Wire Diameter | 0.070 mm, 0.100 mm, 0.150 mm, 0.200 mm, 0.250 mm, 0.300 mm ø |
According to secondary market equipment benchmarks for November 2026, the Makino UX3i is estimated between $45,500 and $93,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $705 / month.
Makino's UXi changes are about accuracy: an internal radiator cooling system for the casting, a chiller that holds temperature within ±0.1 °C, a higher flatness accuracy worktable and an auto seal plate shower. On the spec table the two are almost identical, and the UX3i table is listed at 630 x 460 mm against 630 x 450 mm on the UX3.
Jet-less threading lets it thread interrupted or hollow parts and extremely small start holes, and the auto-threading system anneals the wire to straighten it for consistent threading. After a wire break the operator can rethread in the gap for some applications, which shortens recovery time.
Makino describes it as part of the Hyper Drive Extreme Wire Guide System, which tensions the wire with an AC servo motor over a broader range of settings. The corner control is built into the cutting technology database and improves straightness, size and shape accuracy at corners.
Up to 770 x 590 x 220 mm Tall (30.3 in x 23.2 in x 8.7 in Tall) and 600 kg (1,323 lb), inside a 790 mm x 611 mm (31.10 in x 24.05 in) work tank. Travel is 370 x 270 x 220 mm (14.6 x 10.6 x 8.7 in), with ±50 mm of U and V for taper work.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.