The Sodick AG80L is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG80L sinker EDM: listed 800 x 600 x 500 mm travel, 1,200 x 900 x 600 mm tank, 200 kg electrodes, 9,500 kg. Older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 9,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Work Tank Dimensions | 1,200 x 900 x 600 mm (47.2 x 35.4 x 23.6 in) |
| X-Axis Travel | 800 mm (31.5 in) |
| Y-Axis Travel | 600 mm (23.6 in) |
| Z-Axis Travel | 500 mm (19.7 in) |
| Max Workpiece Weight | 5,000 kg (11,023 lb) |
| Dielectric System | Petroleum-based with chiller and filtration unit |
| Surface Finish | VDI 2 (Ra 0.1 um) achievable |
| Control System | Sodick SP53P CNC (Windows-based touchscreen) |
| Generator Power | Sodick LN2 digital generator, up to 100 A peak current |
| Machine Weight | 9,500 kg (20,944 lb) |
| Positioning Accuracy | 1 um |
| Repeatability | 0.5 um |
| Metal Removal Rate | 700 mm³/min (graphite roughing) |
| Electrode Weight Max | 200 kg (441 lb) |
According to secondary market equipment benchmarks for November 2026, the Sodick AG80L is estimated between $51,000 and $101,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $791 / month.
The listed limit is 5,000 kg (11,023 lb), with electrodes up to 200 kg (441 lb). Those figures are high next to the current AL80G+, which is rated for 6,614 lb (3,000 kg) and 220 lb (100 kg), so confirm them from the nameplate or manual.
The listed tank is 1,200 x 900 x 600 mm (47.2 x 35.4 x 23.6 in), around 800 mm (31.5 in) of X, 600 mm (23.6 in) of Y and 500 mm (19.7 in) of Z. The 600 mm depth sets the tallest part that can be fully covered.
The listed control is a Sodick SP53P CNC with a Windows-based touchscreen, driving a Sodick LN2 digital generator at up to 100 A peak current. Run the control and a test burn before buying, as these rows have not been checked against Sodick.
The AG80L is not in Sodick's current lineup. The closest current size is the AL80G+, which has 33.46 in (850 mm) of X, 20.47 in (520 mm) of Y and 16.53 in (420 mm) of Z and weighs 21,605 lb (9,800 kg).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.