The Makino UX6 is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Makino UX6 wire EDM: 650 x 450 x 420 mm travels, 1,500 kg part limit, parts up to 420 mm tall on a 3-sided 910 x 710 mm table.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Makino (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 3-Sided 910 x 710 mm (3-Sided 35.8 in x 28.0 in) |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 3-Sided 910 x 710 mm (3-Sided 35.8 in x 28.0 in) |
| X-Axis Travel | 650 mm (25.6 in) |
| Y-Axis Travel | 450 mm (17.7 in) |
| Z-Axis Travel | 420 mm (16.5 in) |
| U Axis Travel | ±75 mm (±3.0 in) |
| V Axis Travel | ±75 mm (±3.0 in) |
| Max Workpiece Size | 1000 x 800 x 420 mm Tall (39.4 in x 31.5 in x 16.5 in Tall) |
| Max Workpiece Weight | 1,500 kg (3,307 lb) |
| Work Tank Size | 1,070 mm x 880 mm (42.12 in x 34.64 in) |
| Wire Diameter | 0.100mm, 0.150mm, 0.200mm, 0.250mm, 0.300mm ø |
According to secondary market equipment benchmarks for November 2026, the Makino UX6 is estimated between $43,000 and $89,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $667 / month.
Both have 650 x 450 x 420 mm (25.6 x 17.7 x 16.5 in) of travel, ±75 mm (±3.0 in) of U and V and a 1,500 kg (3,307 lb) workpiece limit. The UX6 has a 3-Sided table and a listed workpiece height of 420 mm (16.5 in); the UX6i has a 4-Sided table and a listed height of 400 mm (15.8 in).
Up to 1,500 kg (3,307 lb) and 1000 x 800 x 420 mm Tall (39.4 in x 31.5 in x 16.5 in Tall). The tank is 1,070 mm x 880 mm (42.12 in x 34.64 in), so a part at the plan limit leaves little room for clamps; check fixturing before quoting a full-size plate.
0.100mm, 0.150mm, 0.200mm, 0.250mm and 0.300mm. Makino's conditions library includes 0.300 mm (0.012 in) settings and covers different workpiece materials and wire types, with each condition balanced between speed, accuracy, surface finish and low wire consumption.
No. Makino states that every cutting condition, sealed and poor-flush cuts included, is optimised for low wire consumption, with no special settings or buttons. On tall parts cut through up to 420 mm (16.5 in) of material, wire is a large share of running cost, so having it built in counts.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.