The Mazak QUICK TURN SMART 350 is an industrial-grade CNC Lathes & Turning Centers powered by the MAZATROL SmoothAi CNC. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak QUICK TURN SMART 350: listed 10 in chuck lathe, 1,020 mm (40.2 in) machining length, 4,000 RPM, programmable tailstock. Not on Mazak's model list.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | MAZATROL SmoothAi CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Swing | 420 mm (16.5 in) |
| Max Machining Length | 1,020 mm (40.2 in) |
| Bar Capacity | 65 mm (2.56 in) |
| Chuck Size | 10 in (A2-6 spindle nose) |
| Max Spindle Speed | 4,000 RPM |
| Spindle Motor Power | 22 kW (30 hp) |
| Spindle Torque | 600 Nm (443 ft-lb) |
| Turret Stations | 10 stations |
| Rapid Traverse X | 24 m/min (945 ipm) |
| Rapid Traverse Z | 30 m/min (1,181 ipm) |
| Tailstock | CNC-controlled programmable tailstock |
| Machine Weight | 5,500 kg (12,125 lb) |
| Floor Space | 3,000 x 1,750 mm (118.1 x 68.9 in) |
| CNC Control | MAZATROL SmoothAi CNC |
According to secondary market equipment benchmarks for November 2026, the Mazak QUICK TURN SMART 350 is estimated between $44,500 and $87,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $690 / month.
No. The 350-size entries on Mazak's QUICK TURN model list are the QUICK TURN 350 (Bolt-on), QUICK TURN 350M (Milling, VDI), QUICK TURN 350MY (Milling, Y-axis, VDI) and QUICK TURN 350MSY (Milling, Y-axis, Second Spindle, VDI). Treat the SMART 350 table as listed figures and check them against the machine's own documents.
The listed table gives no milling spindle, Y-axis or second spindle. It lists a turret with 10 stations and a CNC-controlled programmable tailstock. If milling is required, the models Mazak lists with it in this size are the QUICK TURN 350M, 350MY and 350MSY.
A maximum of 4,000 RPM, 22 kW (30 hp) and 600 Nm (443 ft-lb) on an A2-6 spindle nose with a 10 in chuck. The table does not say whether the power and torque are continuous or short-time ratings, so ask for the rating before comparing them with another machine.
The table lists MAZATROL SmoothAi CNC. Mazak's series page describes the QUICK TURN series with MAZATROL SmoothG, on which G code programming is also available. Since the two do not agree, read the control name off the machine or the quotation.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.