The Mazak VTC-530/20 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the MAZATROL SmoothG. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VTC-530/20: fixed-table vertical machining center listed with 2,500 mm (98.4 in) X travel and an optional center partition for two-zone work.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | MAZATROL SmoothG |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT 40 |
| Table / Platter / Chuck Size | 82.68" × 25" |
| Max Table Load Capacity | 2,000 kg |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 10,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 2,500 mm (98.4 in) |
| Y-Axis Travel | 510 mm (20.1 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| Max Spindle Speed | 6000 min-1(rpm) |
| Spindle Taper | BT 40 |
| Spindle Motor Power | 22 kW (30 hp) |
| Tool Capacity | 30 (arm-type ATC); 48 optional |
| Table Size | 82.68" × 25" |
| Max Table Load | 2,000 kg (4,409 lb) |
| Rapid Traverse | 42 m/min (1,654 ipm) |
| Machine Weight | 10,500 kg (23,149 lb) |
| CNC Control | MAZATROL SmoothG |
| Machine Type | Vertical traveling column |
| Guide Type | Linear roller guides (all axes) |
| Tool Shank | CAT No.50 |
According to secondary market equipment benchmarks for November 2026, the Mazak VTC-530/20 is estimated between $49,000 and $86,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
Mazak describes it as an option that allows the VTC-530/20 to be used as two separate machines. Setup, loading and unloading are done on one side of the partition while machining runs on the other, so the spindle does not wait for the operator. Both sides share the same spindle and tool magazine.
X travel is listed at 2,500 mm (98.4 in), with 510 mm (20.1 in) in Y and 510 mm (20.1 in) in Z. With the optional center partition fitted, that X length is divided between the two work zones.
According to secondary market equipment benchmarks for November 2026, the Mazak VTC-530/20 is estimated between $49,000 and $86,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $760 / month.
MAZATROL conversational programming, in which the operator answers on-screen questions from the workpiece drawing; a pocket milling cycle that keeps a constant angle of engagement between cutter and material; and the VFC function, which stores overridden cutting conditions for use in new programs. The control is listed as MAZATROL SmoothG.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.