The Mazak OPTIPLEX 3015 DDL is an industrial-grade Fiber Laser Cutting Machines powered by the MAZATROL PreviewG (19-inch SXGA touchscreen, 16 GB storage). It offers working travels of 1595 x 3110 x 110 mm, a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak OPTIPLEX 3015 DDL: 4 kW direct diode laser, 1,524 x 3,048 mm (60 x 120 in) working area, 120 m/min rapids. Listed figures for an older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | MAZATROL PreviewG (19-inch SXGA touchscreen, 16 GB storage) |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,595 mm |
| Y-Axis Travel | 3,110 mm |
| Z-Axis Travel | 110 mm |
| Spindle Taper Interface | Standard |
| Rapid Traverse Rate | 120 m/min (4,724 ipm) |
| Approx. Machine Weight | 16,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Working Area | 1,524 x 3,048 mm (60 x 120 in) |
| X Axis Travel | 1,595 mm (62.8 in) |
| Y Axis Travel | 3,110 mm (122.4 in) |
| Z Axis Travel | 110 mm (4.33 in) |
| Laser Type | Direct Diode Laser (Panasonic YL-F40, 0.97 micron wavelength) |
| Laser Power | 4 kW |
| Laser Modes | CW and pulsed, +/- 2% power stability |
| Max Thickness Mild Steel | 25 mm (1.0 in) |
| Max Thickness Stainless Steel | 19 mm (0.75 in) |
| Max Thickness Aluminum | 16 mm (0.63 in) |
| Max Thickness Brass | 10 mm (0.38 in) |
| Max Thickness Copper | 10 mm (0.38 in) |
| Max Thickness Galvanized | 5 mm (0.188 in) |
| Rapid Traverse Xy | 120 m/min (4,724 ipm) |
| Rapid Traverse Z | 60 m/min (2,362 ipm) |
| Acceleration | 1.8G |
| Positioning Accuracy Xy | +/- 0.05 mm per 500 mm (+/- 0.002 in per 19.68 in) |
| Positioning Accuracy Z | +/- 0.01 mm per 100 mm (+/- 0.0004 in per 3.94 in) |
| Repeatability | +/- 0.03 mm (0.0012 in) |
| Drive System Xy | Helical rack-and-pinion |
| Drive System Z | Ball screw |
| Pallet Load Capacity | 930 kg (2,050 lb) per pallet |
| Pallet Change Time | ~25 seconds |
| Machine Weight | 16,500 kg (36,376 lb) |
| Machine Dimensions | 8,490 x 3,486 x 2,010 mm (334 x 137 x 79 in) |
| Floor Space | 10,000 x 6,100 mm (394 x 240 in) |
| Work Table Height | 900 mm (35.4 in) |
| CNC Control | MAZATROL PreviewG (19-inch SXGA touchscreen, 16 GB storage) |
| Wall Plug Efficiency | ~45% |
| Power Requirement | 57 kVA |
Our best estimate for the Mazak OPTIPLEX 3015 DDL is $150,000 - $300,000 (used, 2016-2019 models). This is an estimate for a cnc laser cutting machines in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-optiplex-3015-ddr#price; the request is passed to Yamazaki Mazak or an authorised dealer.
No. The OPTIPLEX 3015 DDL is not in Mazak's current lineup and may be an older model. The figures on this page are the listed ones and could not be matched to a current Mazak page, so confirm them against the nameplate and the documentation of any machine you are offered.
The listed source is a 4 kW direct diode laser, a Panasonic YL-F40 with a 0.97 micron wavelength. It is listed as running in CW and pulsed modes with +/- 2% power stability, and the listed wall-plug efficiency is about 45%.
The listed maximums are 25 mm (1.0 in) in mild steel, 19 mm (0.75 in) in stainless steel, 16 mm (0.63 in) in aluminum, 10 mm (0.38 in) in brass, 10 mm (0.38 in) in copper and 5 mm (0.188 in) in galvanized sheet. Those are limits at 4 kW, and production thicknesses are normally lower.
The listed working area is 1,524 x 3,048 mm (60 x 120 in). X travel is listed at 1,595 mm (62.8 in), Y travel at 3,110 mm (122.4 in) and Z travel at 110 mm (4.33 in). Each pallet is listed at 930 kg (2,050 lb), and a pallet change takes about 25 seconds.
The listed machine is 8,490 x 3,486 x 2,010 mm (334 x 137 x 79 in) and weighs 16,500 kg (36,376 lb). Listed floor space is 10,000 x 6,100 mm (394 x 240 in), the work table height is 900 mm (35.4 in) and the power requirement is 57 kVA. Check these against the installation drawing of the actual machine.
